I fitted a ferroli domicondense 26 for a landlord 19 months ago ( not my choice ) I was serviced at 12 months when I did the gas safety check. last week the tenant. Called ferroli as the boiler was showing a fault code. The engineer has been and says the boiler is beyond economical repair and...
Hi people. Have a customer with a ferroli optimax 25 ov boiler. Have spoken to ferroli and they say it can't be converted to a sealed system boiler as the boiler doesn't have prv or expansion vessel. Surely if I instal robokit with correct size vessel for system this would be ok. Does anyone...
Hi,
Went to a Ferroli modena earlier for a basic annual check. Gas rate was fine, 32kW. The Co reading though went crazy...had my kane 455 bleeping like mad..Co in the hundreds, before the ratio even got to 0.008. this was done thru the test point on the combustion case ( liitle grey stoppas...
hi,my boiler will only run when pressurised to 2.5 bar,obviously as soon as it's hot it dumps through the prv. Could it be the pressure vessel or yet another pcb ? all advice gratefully received,thanks
Anyone got the MI's for this? I've got them for GC41-267-15/17/08/09/10, pretty much the same thing.
Hateful horrible piece of crap. Had to go look at one not working earlier.
Pretty sure it's the sequence control on the gas valve as I'm getting no 240v to the fan. I Just need to make sure...
Hi. I have a 10yr old Ferroli F30e, BOILER that stopped working, I have had a new PCB a new fan and a new air circulator switch and it will not fire up everything sounds like it is working just refuses to spark up, there is no LED light to indicate ignition work. Any suggestions I am desperate????
Hi Guy's this is my first post (I wasn't even aware such an amazing resource existed) so well done!
I have A Ferroli Optimax 31c that sprung a leak on the water inlet plastic manifold (39837170) due to a hairline crack.
Now, I am aware that these boilers do not have a good reputation but I...
Hi Guys, New to this forum so hoping someone can help? Have a Ferroli Domicondens 26c fitted in my flat (was here when I bought the place), I am told it is less than 2 years old but no warranty as there is no paper work.
The error code A51 shown up on the boiler and now I get no heating or hot...
Hi, looking some advice. While servicing a ferroli domicompact f30d i noticed that the plastic blanking cap for twin flue outlet was took off! When i put it back on boiler wouldn't fire so i thought venturi needed replaced but this didnt cure the fault. So im thinking the fan has just aged and...
ok so a month ago I had this boiler fitted and all seemed ok until the boiler started with a error code (cant remember now what it was) so I contacted ferroli and they came out next day and replaced the PCB and the error stopped and the boiler seem to work fine again the problem is as the boiler...
Hi all,
Unfortunately this is yet another Ferroli problem! We've had a few problems in the past with this but thankfully we've always been able to solve them through advice from forums. Previous problems and solutions are listed below:
1. The boiler does nothing but display 'noCa' on the...
Hi All
Recently purchased a flat and i know the boiler has not been used for months as the place was unoccupied.
It does power up for a few second then BOTH fuses blow on the PCB, the display shows '7' when the power is on.
Could this be something simple like a stuck CH pump (Grundfoss) or...
I will try this again as previous thread was locked.
Firstly I am not looking for advice on how to modify or repair a boiler. I am looking for a considered opinion and the issues raised so I can make an informed decision about costs and the issues with the boiler.
I HAVE A GSR ENGINEER BOOKED...
Hi.
Have a ferrolli optimax h1 31c boiler with HW and no CH. The CH return is getting hot but not the Ch flow. Due to a cock up never registered warranty even though have paperwork. Divertor valve.
Annoying as ferroli charged me 280 for a leak repair in december. Still waiting their...
Went to a large domicile today.
Bloke knew he needed an 837 to run alongside his 31kw boiler which heated his UVHC. The two systems were separate and needed to stay that way.
His u6 gas meter on a 22mm supply wasn't an issue nor was his fully open bypass.
Spent a long time expressing my...
Hi all, I was wondering if anybody had any ideas why said boiler is making whining high pitch noises in CH mode. I can pinpoint the noises to around the plate exchanger and diverter valve .Pump seems to be purring nicely and noises are worse when selector switch is on 3 , goes quieter on 2...
Heating works fine, hot water never gets to full temperature, eventually runs cold. If the hot water is ran for long enough it will eventually get lukewarm then back to cold and repeat the cycle, never getting fully hot nor fully cold.
When running the hot water, it slowly gets hot but never...
Hi,
Could anyone give me some advice or information please? My mother (age 79 and living alone) has a 6(?) year old Ferroli Optimax HE 39C condensing boiler which is serviced annually. Over the years it has given a lot of trouble but as my father dealt with it while he was still alive, I...
Went to the above old boiler, pump and fan running, but not firing unless I loosen a case screw. Not even a huge amount. Couldn't see any issues with the flue without stripping it down.
Anyone any experience of these boilers? I blew down the pressure switch tubes back to the fan and they...
Hi
Wonder if you could help with CH problem. DHW is working fine with my Ferroli F24 and the BAR tends to hover between 1 and 1.5 went using DHW.
However, when I switch the CH on, the boiler fires up for a few minutes, then the BAR creeps to around 2.5 BAR and then the CH cuts out. I think...