Hi All
I have a problem with my Optimax HE 38 C boiler. Basically the hot water temperature starts off hot then quite quickly becomes tepid at other times the water is very hot (scalding). Have tried switching between ECO and comfort settings but makes no real difference.
Seems very erratic...
I have Ferroli Optimax 18s which has a failed return sensor and water seal leak (which has probably caused the sensor to fail) in the pipe from the pump outlet to the heat exchanger.
Live in BD18 area, appears all who I have rang don't wan to touch Ferroli
Many thanks
Hi all
Anyone know anything about these boilers? Went to one today and the thing is making a lot of noise the case is vibrating and slowly gets louder.
It seems to coming from the pump but when i checked it over the pump seems fine though certainly changing the pump speed has an effect on the noise
Hi this is my first post so I hope I get in all of the details.
I'm a landlord of a flat in London and I'm currently abroad. We have Foxton's managing our property (which was probably a mistake) and their contractor has quoted us 710 pounds (+VAT) to change the main heat exchanger in our...
Hi,
Can anyone tell me where I can get the TS sheet for my Boiler.
I live out in Spain and the local agents does not speak English. Their boilers out here are different and he does not have the information.
Thanks in advance.
C-kip
Sorry guys this is abit limited but thought I may aswell post it all the same.
Was called to a job tonight, no central heating on a Ferroli condensing boiler( not sure of model).
After fiddling about with it I managed to get it going. But something isn't right with it.Has anyone had any...
Hi,
I now live in spain and brought the above boiler (new) out with me from England.
It has been installed and I got the local Ferroli Agents to commission it.
It is working correctly but the temperature on the central heating will not go above 64degs even though it is set to 80degs.
The local...
I am constantly getting the F37 error code on my boiler as detailed above on a daily basis now, this has always been a problem, but from the boiler doing this every 4 weeks or so, this is now happening every day. I am also getting constant air locks in the bedroom and bathroom radiators, which i...
Hello
I need help please with my central heating boiler. I'm in a bit of a fix as my husband has had a knee operation and I'm trying to get the central heating to work. We haven't used the heating all summer, but the hot water has worked normally with no problems. However, when I tried to turn...
Hi, our Falcon is making some very loud banging noises sparodically. The DHW is fine but the CH doesn't work at all. We need is fixing ASAP as we're are selling our house and will have a Survey done this week. My number is 07738 377314. thanks.. Chris
Hi Guys, would appreciate some feedback on a fault I am trying to diagnose on a Ferroli HE Plus 38C please.
I have seen posts already covering some of the issues but I have monitored a particular sequence which may ring some bells?
Sequence starting from the boiler working normally and CH on...
Hi,
I have a Ferroli Modena 80E boiler.
Previously the boiler had a problem where the hot water / CH would cut out, and would require a reset of the boiler, or a slight bang on the case to get it to run again.
The hot water seems to be working fine now.
The central heating is cutting out itself...
evenin lads......I have a budget central heating job to fit and wondered if any of you guys have fitted either of the above boilers and what are your thoughts. I see the Modena only has 4 moving parts so could be a good thing?? I don't know!! and input is muchly appreciated!!!
When I try to put the central heating on it comes on and the display shows it heating up rapidly and then it turns off with an error message "D2".
Im led to believe it is something to do with the valves and I had occasion to mess with all the valves yesterday, previously it was working fine...
hi guys,
got called to a ferroli modena 80. will not fire up on hw or heating
on powering the boiler with heating on demand, the pum runs but nothing else. neon 5 flashes indicating low pressure, pressure is fine but bypassed pressure switch to make sure. still nothing. bypassed fan pressure...
I went to look at one of these lovely devices toda - CH fires for about 5 seconds, repeatedly, with no demand. I'm pretty certain it's the frost protection kicking in, but to be sure I'd like to confirm what the expected resistance should be on the NTC stats. Anybody know offhand please?
Also...
Hi there,
My Ferroli 77 ff combi boiler fires up fine, the heating works, it heats the water it's just that the water is scalding!
There is only a heating temp gauge which is currently turned down to almost zero...
Any ideas how I can get the water to not be so hot?!
Many thanks :)
Sorry if this is not in the right section...I am not a plumber, but a consumer. Here is the story so far:
My mother is having problems with the Ferroli Optimax HE 31C gas boiler installed in her house. I employed a local tradesman to install the central heating and boiler system, in December...
lads.....just had a custurd phone me up with an f7 fault on the above boiler......in manual it says delivery sensor fault.....wtf is the delivery sensor? cheers.