Hi Forum,
I am about to start the process of removing a wood pellet boiler and replacing it with a Grant Vortex Eco 15-21kW Utility condensing oil boiler.
Flue currently in use is Staovax XQ Stainles twin-wall system, Stovax's manual states "For use with both commercial and domestic high...
The flat upstairs’s overflow has developed a steady leak directly onto my boiler flue below. The water has found its way in through the flue and floods my boiler housing and kitchen. Is there something wrong with my flue? Can they be fixed or am I looking at a whole new boiler?
The flat...
I've been asked to carry out a boiler replacement for a customer but haven't come across this type of set up before, i'm looking for a bit of advice from some of you more knowledgable chaps!
Boiler is in the kitchen cupboard on top floor of flat, its a Halstead CBX 24, and the flue terminates...
Hello
new to the forum so will say thank you in advance to all and any assistance you can provide.
background: current boiler installed in Basement in 2011. Six months ago it failed gas safety for the first time, I sought a second opinion and same thing. Diagnosis being that the flue...
Can anyone tell me if fitting a new boiler flue through a chimney is OK or not. There is already a flue going through it but just need clarification. See attached. There is also a new roof been fitted over door which makes flue to close to returning wall / panelling. See attached too. Any...
I've just had a Worcester Bosh 25-32 Heat Slave oil fired boiler installed and the sound from the flue is like a jet engine and can be heard 25 yards away at the bottom of my garden. I'm told oil fired boilers are quite noisy but this is ridiculous. Is this normal. I even spent a few pounds on a...
Hello,
I live in a conversion with 12 flats and we have communal heating and hot water. We have separate boilers for heating and hot water. The boiler for heating is a Potterton Dimplomat 225 (66Kw), and about 45 years old or more. If you were to take an educated guess, what kind of...
We currently have a Potterton suprima 40litres.boiler the flue comes out where the conservatory we are planning to build will be. Can anyone advise what our options are please other than moving the boiler.
Thank you.
Hi Everyone,
Just thought I'd post a picture showing a whole new approach of terminating a fanned flue.
Installed by a loft conversion specialist!!!(more likely a family friend.)
Unbelievable!!!
On behalf of a friend we are looking for which fan flued ng combi or system boiler has a good fitting from inside only. The outside is in Bath and 3/4 Floors up but the outside is above the River Avon
so no ladders too high and no scaffold...unless expensive suspended stuff. around 20kw to 30kw...
Hi can i get some advice, does the facia and soffit of the house class a eave, as the flue coming out of the wall is more then 200mm from the eave but only 20mm away from soffit and facia. Would it still need to be a distance of 200mm or would it be 75mm same as guttering and drain pipes...
Anyone fitted these problem I am finding is it does not close down enough for the thickness of the wall and cannot be cut they are not the same as a normal horizontal flue , phoned Valliant technical they said it is what it is not alot of help. Kop
Hi all, can anyone advise if it's possible to route a flue from a condensing boiler in an underground room up through the ceiling (15" thick) where it will come out above ground on a flat surface ?
And from there it will extend up the side of the house, as in this picture ?
Hi all,
Bit of a weird issue with my flue.
I live in a 1st floor flat and over the last 12 months or so more & more rain water has been leaking through my flue and on to my boiler.
The leaking only happens when the rain is driving directly towards the flue. When the rain does drop back...
I'm after a boiler with a rear flue option for a replacement cupboard installation, i know the Vaillant Ecofit Pure and Gloworm equivalent but i've fitted one before and wasn't really happy paying a grand for what seems to be essentially the same as a £480 Heatline Capriz2 so was looking for...
Hi guys, looking at a vaillant and the flue shows signs of corrosion on the air intake, I put my analyser in and o2 was coming back at 20.9% with no co readings so flue integrity is fine. It must be caused by water ingress from rain but wondering if I should at risk it or not.
I’m going to be moving a Vokera Unica i32 on Monday.
I had a quick look at the building while driving past and it looks like the steel gas service pipe running externally to the flat above is where the flue would come out so I’ll have to re direct it a bit.
I was looking at BS 5440 and can’t...
I always do a flue integrity check on the air inlet sample point. Never had an issue.
Doing one today and I realised I don’t know what values the are to be classed as a fail.
Can’t seem to find it in my books either.
Is there a TB I can read to refresh my brain?
Hi I had this problem earlier in the year (I’ve got breakdown cover with British Gas) they came out and diagnosed the problem and fixed the boiler but the engineer told me that the breakdown cover doesn’t cover the flue and if I had the problem again it would be very likely they wouldn’t come...