TL;DR version
Getting new combi to replace vented conventional system
Q 1) thoughts and opinions of weather compensating programmers?
Q 2) Most of my CH pipe is 15mm will a chunk of this need to be replaced with 22mm?
Q 3) Condensing boilers need a return of 55c or under to be most efficient...
Afternoon Plumber gurus.
Have a rented property which has a gravity fed system in it. Been asked by tenant to sort a few problems with heating. 1. bleed a radiator (give me strength) the other is she cant have hot water without the heating on. (had house a year)
I thought this would be a MZV...
Possibly the wrong section for this as it has very little to do with solid fuel, but as gravity circulation plays a big role in the idea I thought the solid fuel section may be more appropriate.
I've got an idea for a problem and I can't for the life of me figure out if it will work or not...
Hi Guys ,
Had a call from a customer whos oil boiler is not heating the cylinder properly and i dont know why so i would be glad of any advice .
Oil boiler with gravity 28mm primary to cyl and pumped to radiators . The boiler is working fine and rads work ok if needed...
Hi, Only a shower which a friend has a gravity fully pumped sealed heating system installed, with three port valve etc!
What I was fussing about was that the boiler and the cylinder are sited downstairs in the kitchen, and the f&e (cwsc) tank upstairs which replace water to cylinder and also...
Hi Guys,
I’m new to the forum and looking for a bit of advice, so please take it easy on me.
I want to fit a mixer tap to a new bathroom basin, but I have mains fed cold water and gravity fed hot water. Providing I get a mixer tap suitable for low pressure will I get a decent performance from...
Hi
live just replaced a gravity fed bar shower mixer which seemed to be working fine when I left it.
Customer has called back saying when the shower is raised to the height of the bracket the temperature dros to a Luke warm temp.
When it comes down to waist level it's fine. I think it's a...
I have just been to look at a house that initially looked to be an old gravity hot water and pumped c/h system. The cylinder was changed last summer (not by me), and since then the header tank has run over when the boiler is on for hot water. After a lot of mucking about I found in another...
Hi everyone
would appreciate any ideas on the above system.
I have just passed my gas safe and my sister wants me to convert her system to the one above. (good place for me to practice)
is there anything I should look out for..... I have already warned her that sealing and open vent system...