evening,
I am looking at insulating a plastic overflow pipe 21.5mm? They have some cheap insultion down at wickes but looking at something that will last and not disolve with uv. Any reccomendation please?
Cheers!
Hello All
My Boiler is dropping pressure and the hot taps are running lukewarm. Pressure was never great..3 floors up so only ever just over 1 bar. I called out the Gas Safe engineer who usually services the boiler and he said that the flat plate exchanger would most likely be scaled up...
Hi Guys thinking on my feet here but just wanted to know if standard 21.5mm overflow pipe and fittings were solvent weld a standard.....im sort of guessing they are but would like to know for sure ?
It's for boiler condensate btw )))
Was doing work for a customer some months ago, and he mentioned that a few neighbours had told him his overflow was leaking outside. He lives in a block of about 8 flats. He said he hadn't noticed anything, but I had a look round and couldn't see anything myself. Left it at that.
He's called...
Evening all
Had a call out today from a care home, hot water coming out of overflow.
It was from the f&e header central heating. I removed the lid and found the level was high and
Expansion was overflowing into the tank. The heating was on the rads were working fine and hot
water was also...
robo1889
Thread
central
central heating
expansion
heating
overflow
tank
Hello.
I own a flat in a small block of flats and there is an issue with one of the other flats overflow pipe (from the cistern) which is constantly dripping.
The flat is question is owned by an absent landlord who seems only interested in getting their monthly rent and not keeping the flat...
Hi,
I am replacing my cold water tank in the loft as its made from asbestos. There is an overflow pipe feeding into it as expected however oddly this doesn't come from the top of the hot water cylinder, it comes up from the floor boards so i cant see where the pipe is connected to. Has anyone...
Hi. I posted this to relevant thread few days back but there was no response so I'm trying a new thread.
I have gravity system with solid fuel stove and oil boiler with dual coil cylinder. Everything worked fine until I replaced the oil boiler with an air to water heat pump. The new heat...
Hi everyone,
I would really appreciate any advice you might be able to give me on resolving the following problem please:
I am a diy plumber and I have just replaced my bath suite in which I had to isolate the water from the mains stopcock on the road. Since I have switched the water back...
Just a quick one. I need to join some plastic overflow pipe to existing 22mm copper pipe. What are the options for joining the two together? I'm thinking maybe Speedfit/pushfit 22mm coupler, but not sure if this is correct.
Thanks in advance for any advice.
Hi all,
Wonder if somebody can provide me with some advice on a CenterStore 120 unvented hot water tank.
The unit has two power inlets - 1 on the ECO7 and 1 for the booster. The main source to heat up the water is via ECO7 which switches on about 2200 and will heat up the water over night...
Hi everyone,
Newbie here, any help appreciated. Was in the trade for 20 odd years but moved into FM (ok, I know....):wacko: so am a bit rusty but still do everything around the house etc.
I have a cupboard mounted vanity basin (Qualitex Eden 40) which has a leaking waste. House is only 4 years...
Hi all,
I've just moved into a new house and had a nightmare last night from a pretty simple thing.
I filled the kitchen sink with water to do some washing up. Then when drained the water found it coming up of a little pipe in the cupboard directly underneath (ie into my kitchen).
I'll try...
The overflow from loft in the attic is dripping outside on occasions and feel that the problem is in the header tank. Unfortunately being retired unable to get into the attic as body is not as flexible as it used to be and have no wish to fall. Could you give me some idea of cost in someone...
Hi
I've recently replaced the bottom entry cistern ball valve on my toilet as the water in the cistern was rising too high into the overflow pipe. For ease I kept the original bottom water feed pipe and only fitted the valve and the arm reusing my existing ball valve.
I've set the level to...
Hi,
I have: -
- an open vented central heating system with F&E tank in the loft.
- Sealed cylinder hot water (megaflow). Guess it won't matter with the issue explained below
- Boiler is flexicom hx30 heat only.
Most often (but not absolutely everytime), water drips from the expansion tank...
We've just had some new bath taps fitted and, as a nice little surprise for me, Mrs Underwater had the
plumber install (in my absence) a pop-up drain plug, operated by a shiny rotating control mounted in the overflow hole.
Although it looks nice and neat, I'm concerned that there is very little...
Hi All. I was all set to buy 3 x 3m 22m Hunter overflow pipe, 6 x 90° bend ,2 x 135° bend ,2 x Straight connectors + 125mm solvent cement.
All this was going to be purchased locally at Buildbase at just over £30 which I have no problem with. Prices were checked last week online + stock.
Went...
Dripping overflow from small header thank so i changed the ballcock valve but kept dripping so i tied up the ballcock and drained the tank.Water was dripping in slowly from the bottom outlet.The heating has not been on for over a week,so what pushing the water back through the pipe into the...
Hi again, I recently installed an Wickes Compact Sink with the help of you guys on here successfully, no leaks on the underneath plumbing bits after a month.
But I could just be fussy or wrong on this, my overflow holes are on the top of my sink as shown here...