Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

potterton

  1. D

    Potterton Kingfisher Mf RSL100 replacement

    Hi all I have a customer wanting her Potterton Kingfisher replaced with a floor standing Worcester CDI regular - pretty much like for like. The whole system is very old but she doesn't want to spend any money on it apart from changing the boiler hence the straight swap. The only minor issue I...
  2. J

    CH P.D.Valve always extended - Constant CH from Potterton Performa 24 Combi

    Hi all, I see this question has been asked before but I haven't found a full answer yet, so hoping someone can help. I have a Potterton Performa 24 combi boiler which provides CH even when the dial is in the 'CHW only' position. Following several other threads advice the entire manifold and...
  3. P

    potterton Apollo 25 issues

    Evening lads and lasses , My mate has a Potterton Apollo ,with the following symptom :- Run hot water all day long, put the heating on and it blows off at 2.8 bar . When its cold the pressure sits at 1.2bar . Have replaced the expansion vessel as it was found to be bust. Replaced the PRV as...
  4. A

    Potterton performa fan fault

    Hi everyone, I am going to look at a performa this evening. The customer called this morning, said its showing fan fault and he's 'narrowed it down to pcb or fan'. Sounds like he is going to be great, he has wired up loads of boilers apparently. What checks can I do to test the components...
  5. A

    potterton ec three 215 e

    on a potterton ec three 215 e, what is comfort set point really fiddly control on that boiler, I couldnt figure how to get it on low flame or high flame and in trying, ruined the settings for comfort set point, i'm guessing its kind of like a frost stat and the boiler fires when ever the temp...
  6. B

    Potterton Netaheat Boiler not switching over from CH to WH properly after replaced Valve Actuator

    My Potterton Netaheat Gas boiler in London UK only comes on to heat radiators when in timed water mode after renewing actuator valve or when both water and heating are set to On continuously it only heats water at the timed settings. Have never used a forum before to get advice. Can anyone help...
  7. A

    Replace a Potterton kingfisher

    Evening, Been to look at a Potterton Kingfisher tonight. Customer has stripped all the casing off looking for a leak. They said after running, radiators will start to heat up then the boiler cuts out and water appears on the floor. They have lived there for 35 years and the boiler was in...
  8. D

    Potterton powermax he85

    Hi Does anybody know what the error code a27 signifies? It' not listed in the user manual. Thanks
  9. L

    Potterton Performa 30 he Hot water issue.

    Any help/advice appreciated. I’ve had a look at a Potterton boiler today, the boiler itself is ok, but, it fires up to give hot water to the bath and separate shower but not the bathroom basin or kitchen sink. There is sufficient water pressure and supply to the boiler, the diverted valve...
  10. B

    Replacementment for dead Potterton Flamingo RS40

    My old Potterton Flamingo 40 has just died. It was supplying 5 rads and water, with an immersion heater, to a 2 bed flat with one bathroom. Everything is on one floor in a first floor flat in London SW2. There's a header tank in the loft. Which is the best new boiler to get and how much should I...
  11. R

    Potterton (Netaheat) Profile 40e from 1988 - worth powerflushing?

    Okay, so my boiler kettles fairly badly once it reaches a moderate temperature even under conditions that are allowing good flow rates. Having resolved the system air ingress, let's move on. The Netaheat Profile (later rebranded simply as the Profile) has a cast-iron heat exchanger. It has...
  12. H

    Potterton boiler recommendation

    Hello, have a potterton Promax 30sl, 6 years old and the heat exchanger is leaking. The new boiler, should I avoid potterton altogether? Any good ones to recommend when I get an engineer out? Thanks.
  13. phil hair

    potterton powermax he a27 fault

    got called to a potterton powermax he a27 fault.(dry fire) phoned technical, said was a circulation problem. the pump was turning, water coming out of the bleed valve above burner, could it be the diverter valve is jammed? thanks...........phil
  14. plumb_know

    Potterton Netaheat 10-16 electronic

    Hi everyone not long gas safe and would like a more experienced opinion on scenario below i have tried to give as much detail as possible as know it is hard to give advise over the internet. (bit of an essay sorry) Called to Potterton Netaheat 10-16 electronic and was told it would come on and...
  15. G

    Potterton boiler help ( pressure )

    Good afternoon all, Recently bought a new house and after a few weeks our heating stopped working. Had a look around online here and spoken to a few people and running around in circles. For my heating to work and stay on I have to open up the heating return valve, however, by doing this my...
  16. H

    Please help! - Potterton lynx 2 part needed

    Please help! Does anyone have a spare rubber shroud (grommet) for a potterton lynx 2 ng combi boiler, part number 222161pot? You would make my day! Thanks
  17. B

    Potterton Suprima 80HE showing no power but working intermittently

    Hi, Not sure if in exactly the right forum but someone can point me in the right direction. Have the boiler mentioned in the title. Had an issue a week ago, boiler showing as if no power reaching the boiler, but checked and power reaching boiler fine. Had previous heating engineer replace...
  18. M

    Potterton Lynx 2 combi boiler with intermittent pump

    My father passed away recently and my sister and I have to look after the house until it can be sold. It is fitted with a Potterton Lynx 2 combi boiler from the early 1990s, that only supplies hot tap water and three upstairs radiators, and I've discovered that it doesn't always fire up when...
  19. A

    Potterton Puma 80e combi poor hot water

    Hi guys, Got a customer with this old boiler. I've serviced it for last couple of years but no major issues so to speak. Recently it has started having poor hot water performance, initially hot but then goes to tepid if that with occasional very brief blips of warmer temp water. It switches over...
  20. S

    Potterton Performa 24

    I’m having problems with a Potterton Performa 24, it works fine on hot water. When we call for heating it flashes up for 2 seconds then goes to reset with the case off. When the case is on it lasts a little longer but doesn’t recognise its alight. Tried a new board to no avail still the same...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top