Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
replace
-
S
Taking Out A 28mm Tee to Replace With Connector On Pipe With NO PLAY
Taking Out A 28mm Tee to Replace With Connector On Pipe With No PLAY How do i replace a 28mm tee with a connector when the pipes are rigid and fixed on both sides? I.E.. I can't pull the pipe together to get them into a push fit connector. Do I replace a section with plastic pipe that will...- s3anreilly
- Thread
- pipe replace
- Replies: 23
- Forum: UK Plumbers Forums
-
S
Gravity hot water system - replace or improvement ideas please advise
Hello all, I currently have a gravity hot water system - with a 110x60x60cm water tank and a small one (expansion vessel?) in the loft, the water pressure in the bathrooms (3 on first floor) are very poor, especially the master bedroom en-suite (the furthest way from the cold water tank) which...- Sup9
- Thread
- gravity hot water replace system water
- Replies: 24
- Forum: Bathroom Advice
-
F
bent tap-connector to replace elbow
Hi guys. I was tasked with fitting a new fill-valve to a customer's cistern, whilst I was decorating the place. That part went fine (no leaks from cistern) but I cannot now get a good seal on the joint from the shank of the fill-valve to the old pipework. There was no leak there before I...- foy
- Thread
- replace
- Replies: 8
- Forum: UK Plumbers Forums
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
