The clock timer on the Mt10rf transmitter does not work, but it can be used in day mode to get the heating on.
Is Drayton LP10RF a suitable replacement?
I guess the receiver from this would need to be used rather than the existing Worcester one?
I need to replace a 3/4 or 22mm blending valve on a Telford Trident electric hot water boiler. see attached picture of the original part.
Telford asked me 100£ for the part and refused to provide the technical details. I am pretty confident this is not a proprietary part and similar parts...
I'm replacing the shower cartridge on my Bristan 1901 Thermostatic Exposed Dual Control Shower (Top Outlet). I have removed the cap and screw but the temperature handle won't come off. Am I missing something or does it just need more force?
Hi. Water is slowly leaking into the toilet bowl from the cistern. I suspect that it's the rubber washer at the bottom of the tube that's the problem but I can't figure out how to get to it. I can feel it when I put my hand down to the bottom of the tube and it seems flexible but it's 16 years...
Hi my daughters Ariston Cylinder has started to leak around the Emersion heater. She has never used the emersion heater so I was wondering if there was anyway to take it our and fil the hole with a blank? Or if anyone knows where to find an Ariston cylinder 150L unvented??
Hi,
I’m looking to find a replacement Collector circuit pump for a ground source heat pump. This is the pump on the brine circuit. The pump I have is no longer supported by the manufacture.
It’s a Wilo TOP-S25/7.5
Any recommendations would be very welcome.
Hullo everyone its a while since I posted on here basically because i have had no plumbing issues however I have one now.
My son recently moved into a house which has cellar within which is a radiator which is part of the central heating system. The rad looks old, rusty and horrible as does the...
Hi all,
I'm trying to source a replacement pump for my heating system, I suspect the current pump is an older version that has been superseded, could anyone advise what the latest model would be or an equivelant?
Wilo
Type: RS25/6-3 P
No: 4511050
Any help would be greatly appreciated :)
Thanks
I have a Bristan Manhattan mixer tap in the kitchen. Five years ago, it started to drip. I replaced the valve in the cold water side and the dripping stopped. Recently it began to drip again and I replaced the valve again. But, it still drips sometimes. I’m trying to replace the valve on the...
Hi I'm going to replace the 3 way vale on my open heating system. Hoping someone can advise.
In the picture, to isolate the valve I am going to turn off 1, 2 & 3. However as you can see I can't turn anything off between the valve and the hot water tank. If I use a bung in the header tank, will...
I have a cracked close coupled toilet cistern. It's an Armitage Shanks Tiffany 9776, which I believe has been discontinued. The water feed is on the bottom right hand side of the cistern. Would there be a cistern with which I could replace it?
Mira shower head.
Does anyone know anything about this shower head (I will post pics)
Its gotten a bit dishevelled, does it come apart easily & then just unscrew to replace with a different one ?
My toilet flush valve is continually draining (the rubber seal has perished) . . . I'd be grateful if someone could give me a link to parts that will fit in there and replace the current valves?
We just had a service done on our Ideal ICOS boiler and were told that the 2 screws on the back of the heat exchanger have snapped off. It was marked as dangerous and has quoted a whole new heat exchanger as there are still bits of screws stuck inside that cannot be removed.
For 2 broken screws...
It was fitted with the boiler a Potterton Suprima 30L about 21 years ago. Two PCB's later and a new fan the boiler is working perfectly. However, the programmer display is not showing any digits for the clock or anything else so I am unable to program it. It still works the boiler manually...
During November we have to replace a corroded cast soil pipe on the exterior wall of the 1st and 2nd floors of our 1930’s building. Fine.
However, it also has a smaller diameter pipe running beside it up the full height.
It appears out of the wall, level with the first floor toilet, runs up the...
I need someone to replace my boiler, I am thinking to get an Intergas HRE 24 SB. Our current boiler (and old Ideal) is in the kitchen, and we would like to relocate it to the laundry room or loft, so a new gas line needs to be run. I would prefer someone local in Norwich that can also do the...
Hello,
I'm wondering if you can help me.
I have an insurance company who is trying to get me to make my plumber re-quote for work to replace a broken bath. He's included a bath panel with the quote as it's the type of bath that requires a panel (and the original style is not available so can't...
Hi All.
My Aqualisa Aquavalve enclosed mixer shower valve leaked and gave way and I am looking to replace. I am looking for recommendations what model would I replace it with and how would I replace it if I changed the model! I would like to change the type of model to a lever one.
I have...