Hi guys, got a Worcester greenstar 30cdi to service, I checked it last year and fan pressure was with acceptable limits but boilers 5 years old thos year so will need burner cleaning out. Am I right in thinking you need a special brush as well as a burner gasket or is it just the gasket I need...
Evening all,
I believe it's received wisdom that it's much easier (and cheaper) to retain a customer than to find a new one. That's why I try hard to keep all my gas customers. Every year I send out an email and text message reminding them of their annual service. But it doesn't work. I was...
hello i have scottish power boiler cover .. a couple of times recently boiler shut down on its own (keston) had annual boiler service and engineer told wife the boiler is dirty ..
does this mean there is sludge which of course isnt covered
so it this an excuse for the plumber to try and make...
Hi all,
I have my own business and am looking to go into selling boiler cover where I'd charge on a monthly basis. Like BG or Homeserve but on a much smaller scale.
Has anyone on here tried this?
Any advise would be appreciated
Thanks
Raj
Hi, we have just moved in to a new house and the boiler seems questionable so we would like it servicing and a quote for a replacement.
I have also bought a second hand (12 month old) gas cooker to see us through until we get the kitchen done so we need this fitting and checking over as well...
alright chaps. More advice needed if you will oblige please I’m servicing a fire tomorrow and just wanted some pointers on what to be looking for. I will be having a flick through my books tonight as I haven’t touched one since the class room. Hopefully MIs will be there to check what they...
Can I ask what you guys charge to service unvented cylinders?
It would be at the same time as the boiler is serviced (I charge £70 for the boiler)
New builds -about 5 years old
Just wondering what the process for having an old lead communication pipe-service pipe from water mains removed would be? Do the authorities need informing? (my friend has a lead pipe coming up into kitchen so I'm not sure if this lead pipe will go all the way to the mains or just to outside...
What-ho chaps, I've just taken a booking to service an Amazon gas tumble dryer. Never come across one before so tried googling some info & guess what - 5 pages of **** about an online retailer!
Anyone got an info about these please?
Most manufacturers seem quite good at providing information on their systems but it’s a bit of a pain having to get an internet connection every time you want to access a manual.
Do any manufacturers allow you to bulk download big chunks of their manuals to save to your laptop/iPad...
Powermax 155, I have been asked to service one. I'm G3 as well as gas safe. Anything to look out or watch out for ? Customer tells me there is a loud popping noise on ignition, I'm assuming possibly incorrectly this will be the electrodes. I,ve only ever removed and replaced with a conversion so...
Got one one these to service next week but I dont see many
Its 5 years old and still under warranty
Is it recommended to replace the burner door seal?
Anything else that should be replaced eg electrodes?
Reviewing the Valliant ecoTEC install manual, and steps noted in this book for re-pressurising the internal expansion vessel states the following
- Ensure the boiler CH service valves are closed.
- Release the pressure from the boiler.
- Remove the valve cap from the...
We did some working in a property with what looked like a mechanical/compression connection on the gas service? is this allowed? it was external and had a service supply as standard I didn't take a photo but jut looked odd to me
I've got a customer who needs a mira 88 servicing. It had stopped regulating temperature properly for a couple of months and just recently its completely seized up, the dial will not turn.
There's two service packs available, the cheaper one (936.12), which has all the o rings, spring, spindle...
Im a boiler service engineer, joined for advice and help others if need. Ive started a channel for boiler service modes. So if you need or interested please check them out
Gold Gas
^^^click here^^^
Peace!
Hey gang, I'm a boiler service engineer. Just started a channel for boiler service modes as i struggled to get some system and heat only boilers into max/high fire mode. Its live, so I'll be always updating with more.
Gold Gas
^^ CLICK HERE ^^
Hope it can help some fellow service engineers...