I have a water underfloor heating system installed that has never really worked. There were also radiators installed around the same time that also didn’t work. So basically the entire central heating doesn’t work. There is no air gap in the water pipes, I’m convinced there are some underlying...
Hi, I am trying to see if anyone recognises the brand of this underfloor heating manifold? I think it's about 22 years old. I'm trying to get more details to see if I can change the faulty actuator. Any suggestions welcome. Many thanks, Mark
I've got to pipe up an underfloor heating system, the heating manifold is under a heat only boiler and the central heating pump is fitted in a cupboard on another floor . can I pipe up the manifold direct to the boiler flow as this will be on the negative side of the pump, running a feed all the...
Hello
Underfloor heating installed in 2019 - no probs at all. Suddenly stopped working yesterday.
Thermostat is starting the pump, and lights come on. Pipe is very hot at point 1 - and cold at point 2
I have also noticed a leak at point 3
My theory is the motorised valve has broken - and...
Hi All,
We're been living in a new build property for the past 2 years without any obvious heating issues. We've an underfloor heating system that's split across 4 rooms, and is driven by a Daikin ASHP.
I've occasionally had to take the actuators off in order to release stuck pins after...
Hi, I would appreciate your opinion on this. Our heat pump broke down while we were away and the temperature in the house dropped. A plumber came out to look over the house and check for damage. A couple of taps broke but we had turned off the water so no major problems that cant be fixed...
Hi there, I’m in a new build property, approx 6 years old and our underfloor heating system has been running fine up until now.
We have underfloor heating both upstairs and down stairs, upstairs is fine, but since last week the downstairs has been a lot cooler and is not getting up to...
We've just moved into a house where there is underfloor heating in the lounge. It's not a big lounge yet there are 2 x Heatmiser PRT-WTS controllers - one for the front and one for the back.
The Heatmiser controllers no longer work (Heatmiser say they're too old and I need new ones) but they...
Hello. I am here for some advice please.
We have a water underfloor heating system in our house and have recently had some issues with one of the zones seeming to overheat with the heat still being sent despite the thermostat not sending demand or even being on an all. These are all new...
Has anyone seen this configuration before with zone valves installing under the floor in the joist area with an access trap. Not ideal I know. Is for zoning a downstairs drop system and upstairs 15mm up though the floor. Boiler in the kitchen with pipes exiting upwards from the boiler via stand...
Hi all!
Went to stick the underfloor heating on and the pump started making a weird noise and the first red LED and the last amber LED are on - which per instructions means that the pump is blocked and it is necessary to deblock the shaft. It has a deblocking screw in the centre of the control...
Hi everyone.
A slight conundrum im hoping to get some educated advice on from people who actually know.
Ill be having the whole of my downstairs dug up in order to install insulation (none present) with a 75mm screed on top. Ill then have a wet system underfloor heating installed. My...
So I have just added an underfloor zone to a house extension. Boiler is Worcester Greenstar 30Cdi. has a Comfort II RF stat fitted that controls the radiator zone. I have added a zone valve to my new zone and used the 230V side of the control board to fire the boiler. the boiler fires fine but...
Hi there, just after some advice. I have an underfloor system installed and at the time of laying I had a spare loop put in with a view to adding a conservatory. I've now changed my mind and want instead to add in a single radiator. I can see the unbroken loop protruding into the conservatory...
I currently have a radiator central heating system, controlled by a Nest with OpenTherm (combi boiler, no zones/valves). I'm now getting an extension built which will be one big room from the new structure and the existing kitchen and dining room. I'd like to install underfloor heating in this...
Hello all, I'm hoping someone can advice me on my heating problem - I seem to have lost all downstairs UFH, but the upstairs heating and hot water are fine.
About our system:
We have a gas boiler feeding an 5 zone UFH system downstairs, some radiators upstairs and the hot water cylinder. This...
Good afternoon.
We have just finished our single storey extension and due to costs, I have done quite a lot of the work myself (GRP roof, kitchen fitting, joinery etc)
I also laid all of our underfloor heating pipes and connected to the UFH manifold having spent hours researching both online...
Can I ask for advice, would it be ok to install underfloor heating as an additional zone on an existing s-plan circuit. The plan would be to have the thermostat for the room with the underfloor heating, operating the new zone valve, and at the same time switching the underfloor pump. Would it...
Just having a bit of trouble with one room underfloor heating.
New build bungalow in 2016 with a Daikin Air Source heat pump.
No idea what make the manifold is for our underfloor but for no apparent reason the bathroom will not come up to temperature. Being "older" we have always kept it ay...