Hi,
I fitted underfloor heating to my combi central heating system.
Since fitting it I have a loud noise like water whooshing through the rads. I have made several changes to try and cure the problem. It seems the most likely cause is air in the system.
I have drained the system several times...
chippymike
Thread
central
central heating
fitting
heating
noisy
underfloorunderfloor heating
Hi all,
I'm just in the middle of fitting an intergas 36/40 boiler.
it's a s plan 3 zone system.
regarding underfloor heating, in the boiler manual, it has the following:
what does this exactly mean? Am i to fit a check valve, if so where?
Hi all,
Going on a day trip to Essex tomorrow to look at underfloor heating that wont turn off, me living 80 miles away and not knowing much about underfloor wiring the customer still persisted so hopefully he will be paying for a fix rather than the diesel.
I want to check wiring and manifold...
Hi, im doing a barn conversion and want to install underfloor heating downstairs and rads upstairs. The floor area is 150m2 downstairs with 8 rooms. i have priced up a few systems hep2o, speedfit, etc and some other not known brands and the price difference is ridiculous.. ranging from £1k to...
markyg
Thread
heating
heating system
system
underfloorunderfloor heating
There's so many uheat, prowarm, warmup, nuheat, polypipe etc
I've had a quote from warmup, quite pricey but nothing soul destroying.
Is there a tradesmen's favourite?
Been looking around online for this answer but couldn't find it, can anyone help?
We have an issue with our combi boiler constantly losing pressure. The plumber has been round several times to do different things but nothing has worked. I think it's one of those ' you have to see it', so I'm...
Hi All,
I have a water underfloor system that doesn't appear to be working and I am after any advice anyone is able to offer....
I can't seem to find any information about the system, it was in there when we bought the property.
What temp should the stat be set on - was at 3 but goes up to...
Hi all.
ive trawled the net and this forum looking for a possible diagnosis to my problem and now hoping you can help.
i have a wet ufh system install a year ago. I've used a polypipe mounted in 20mm polystyrene panels by wunda floor. Under the panels is a latex screed over a concrete floor...
Hello all,
Underfloor setup is as follows:
Dedicated 22mm flow from 2 port valve
Dedicated 22mm Return which tees in to 28mm by cylinder.
11 Port Manifold
Grundfos 25-60 Alpha 2 pump on manifold.
Heatmiser setup but nothing is wired in as yet.
The problem is that when the pump is off, the...
hello people
first time i have been asked to price for a underfloor heating system so just after bit of advice.
area is 40m2.
how many m2 should you have to a zone?
thanks Dot
Not done much underfloor before. Client emailed me saying the solenoids not working but he doesn't know who the manufacturer is. If anyone recognises it let me know so I can contact the manufacturer to see how to repair.
Cheers chaps
Hi everyone,
I'm a sparky so my plumbing knowledge is limited.
I was asked to go out to a new underfloor heating system last week as the last 2 sparkys apparently couldnt get it working.
Its a baxi combi boiler with rads upstairs and underfloor downstairs.
the rads are controlled via a...
Hi sll
have 4 new build houses in York that have flooded. They need me to get the heating working asap.
i have fitted on the ground floor underfloor heating it's a Grunfoss ups 25-40/60. Is it a special or would any Grunfoss pump fit and work.
all were under 3ft of water. I could order...
We have a sizeable house with full Polypipe? underfloor heating.
We have 16 thermostats (Belux WFHT-20221UK)
The main control panel (timer/on/off etc) is a Horstmann ChanelPlus 37xl
UFH was fitted when the house was built in 2004 (ish)
We have two problems
1) The spindles in the Belux...
Hi,
I'm hoping somebody could offer some advice. we have an underfloor heating system in 2 rooms (seperate zones, thermostat in each) it works fine in the first room but in the second room it doesn't get warm. what is confusing is the return feed for this room is hot so water is running...
Underfloor heating not working upstairs, it's fine downstairs.
-pressure gauges stay at 40
-pump working
-tried restarting by pressing button on limit thermostat, but it still doesn't work
any ideas to what the problem is?
I have two underfloor heating sets, photo attached.
Both pumps are turning fine. I opened the screw and can see them turn.
The set on the right works fine.
The set on the left does not work. The pipe coming out the bottom of the wilo pump does not heat up.
Please help.
Thanks.
I've just started the build of a rear house extension and would like there to be under floor heating connected to the existing Vaillant 637 system boiler with 470F weather compensator.
The floor will have 100mm PIR insulation and will have 65-75mm of screed on top so I'm looking to attach/clip...
My underfloor heating is set at 21 on the stat but the floor area feels cold to touch. I was expecting to feel a little warmth from it. I have since discovered that my builder has laid a 30sqm pack over a 50sqm area. Is this as bad as it sounds? Thanks in advance
MARIE1
Thread
heating
heating system
system
underfloorunderfloor heating
I am looking for a heating engineer who is experienced in Wirsbo (now Uphonor) underfloor heating systems. This was self installed over 15 years ago when I rebuilt the bungalow but the manifolds desperately need a service as the valves are sticking and not opening.
I have been given a contact by...