I have a ferolli HE31C and it has developed a water leak that appears to be from a porous casing in the gas valve. I can not see where water even enters the gas valve as I presume the gas goes in the bottom and out of the top of the valve. To check this out I dried it off and put some sealant...
Leaking toilet - needs replacement flush valve but existing screws direct into cistern not fixed with nurt and seal.
How do I get this type of valve or is the thread size the same as the spigot and nut type so I get one of the latter and dispose of the nut & seal?
My unvented domestic heating and hot water system incorporates a RWC CWIC 2000 3/4.5 bar pressure control which recently has begun to overflow periodically outside the house.
The system is only 3 years old.
I am not fully sure of the 5 RWC connections but the two regulated outlets feed the...
Hello all,
We just finished renovating our house and there are some issues with the plumbing: that is, our shower has a terrible smell. During the renovation, we had a last minute change to move the toilet down the hall. Although it is a new renovation, we did clean it to make sure there is...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one.
Granddaughter just moved house and this valve decided to leak when it was closed.
When open its fine.
Normally I have repacked the gland on...
Water Heater Screaming Sound on Cold Water Line Spring Check Valve
Have this water heater for around 1 year, and it started doing this some time ago.
Any suggestions on how to fix this?
Hi All,
I hope you are doing well.
I have a problem. Not sure if this was always like that or something is degrading.
Whenever the toilet refills when it finishes there is a knock in the pipes. The same happens when the washing machine finishes taking water.
Is this because there is too tight...
Hi,
Short version:
Do frost protection valves trigger when the water in the pipe gets to threshold, or when the air temp drops?
Long version:
I'd rather use frost protection + anti-freeze cycle on my mitsubishi ecodan heat pump. The warranty is apparently fine with that combination, and it...
Hello, as the title, the cistern keeps filling.
The fill valve is passing, think it’s a viva skylo bottom entry with a plastic shank but there’s not markings or identification on it. Just wondering if anyone knows what type it is?
I’d rather just replace the diaphragm inside if it’s one that’s...
Water keeps filling up my home water tank from the output valve at the bottom of the tank and not from the top of the tank
Water keeps pouring in from the output valve and won't stop, making the tank overflow 24/24
At first we thought it was the input valve at the top but after inspection we...
Hello,
I have to replace the flush valve and/or the washer but unfortunately it's inside the vanity unit.
The only way is removing the toilet.
I turned the screw on the cistern pipe to stop the water.
I removed all the silicon around the toilet, now I can easily lift up the Front panel but...
This is driving me bonkers!
I have a Jaquar shower mixer unit - which has started to leak from the diverter cartridge. I think it's an early Florentine model circa 2006 though not 100% sure.
I've removed the faceplate, unscrewed the chrome collar - and now want to extract the diverter...
Hello. My home's Rheem water heater is dripping from the drain valve. It is strange as it seems to sometimes spit out some water and then stop and then occurs again. I have a little plastic bucket to collect the water, probably about 3 cups of water in a 24 hour period. I was doing some...
Hi all, I am trying to find an alternative flush valve to fit the cradle of a ideal standard push btn flush.
It is all tiled in and changing to a Siamp or fluidmaster is not an option anyone have any ideas
Thanks
In the photo there is a grey 32mm push fit elbow between the sink trap and down pipe. I want to replace the elbow with a "male" push fit tee attached to an air admittance valve to stop gurgling noises.
I can't find a tee fitting that description, can anybody offer a solution as you can see space...
Hi everyone,
I've joined the forum today as I've found myself going round in circles with what I think might be a pretty simple problem, hoping someone can help.
Our dishwasher is leaking and the manual says this can be fixed by cleaning the water inlet filter. To do this, we need to close the...
Hi there,
All was good until one day the hot water suddenly started running quite a lot cooler. Putting my hand on the output at the boiler it's still hot there so I'm guessing there's a problem with cold water feeding into the hot water somewhere along the line. I have mixer taps on two...