Hello,
I just moved into a house with this boiler. It was last serviced in June, but I imagine the CH part hasn't been used over the summer. Just before I moved in a couple of days ago, I had some plastering done that involved removing and replacing two radiators. I was told they...
NibblyPig
Thread
central
central heating
heating
hot water
vokera
water
Hi,
I have a Vokera Unica HE boiler and it has fault code 10
Had new ignition spark, condenser and flame sensor installed, but still same fault
I can get it to light and work, if I turn the gas supply valve down to approx 1/3 open, but once I open it fully it will not reignite after it...
Hi all
Can anyone suggest a two channel controller that i can use with a vokera 25 he combi and an unvented cylinder. at present the heating and hot water have to be on together. the hot water from the combi is blocked off and its set up as a system boiler. there are 2 two port valves fitted but...
Having a nightmare with this boiler. Any advice appreciated.
Boiler goes through ignition sequence, burner fires and then boiler locks out. I would have guessed fsp but it fires for litterally 2 seconds. From experience it would normally take longer before it locked out. Am going back with a...
Our Vokera Compact 24SE shows a red light when the gas is trying to ignite, which it fails to do, and then the red light goes back to green/flashing green a few seconds later when we turn off the hot water tap/heating thermostat.
Before we get an engineer to come and look at it, any ideas as...
Im in trouble and hope an expert can help me. I have moved my boiler today and i was quite impressed with how neat the plumbing turned out. Can anyone help me with ERROR CODE 52.
Best Regards
Hi,
I need to repressure my vokera mynute boiler and I know that I have to turn something on the silver, flexible tube on the boiler but not sure what to turn. any suggestions?
Just after some friendly advice on what could cause this problem with this not so good boiler
Its the Vokera HE 25 Compact
The heating works fine
The hot water i turn the tap on and its warms up then cools back to cold then 10 - 15 seconds later warms up for 10 seconds and cools back...
Hi guys,
Please excuse my newbieness but you guys look like a friendly bunch of chaps ;)
Recently my radiators stopped working on my Linea 24. Timer seemed to be clicking the pump into action (I could hear it working) but the pilot light would on come on for 10 seconds after a complete...
Just looking for a bit of advice on the Vokera Maxin24e. When the hot water was running for a while the boiler goes to lockout and needs reset before it will run again for another while. I had an ignition control board from one which I had taken out and stuck that in but the same thing has...
I have problem with hot water. Water going hot/cold/hot/cold. Pressure gauge jumping up/down. I have switch only dhwater. When change at dhw & heating automaticly hot water going to radiators. I changed thermisor. What is this problem???
Hi all,
Had a call yesterday from someone with a vokera linea 28 combi boiler.
She tells me the pressure gauge on the front of the boiler is showing 0bar, she has tried to top up the pressure via filling loop underneath boiler but she cant hear any sound of filling or see any movement on the...
Hi there, does anyone know the maximum amount of radiators this boiler is designed to serve? I was at a house last week and the tenant has 10 radiators in the property and 1 (the furthest away
from the boiler) doesn't heat the same as the rest. It isn't choked and doesn't need bled. If you turn...
I have a Vokera compact 29 that is starting up normally, fan running, aps made,pump running,igniting and firing up but then cutting out a few seconds later with a solid red light and a flashing yellow. Could this be the pilot failing causing the gas valve to close??? Or something else?
Any help...
Went to this one today.
customer reported fan was getting noisy.
found fan runs on high speed continually. I think as it's permanent pilot it should run at low speed then ramp up when a demand is on.
Hot water and heating working fine but fan running on full speed constantly.
i am guessing at...
tomorrow i am going to a vokera linea 28he
showing up fault code 34 (Fan fault)
have you ever came across this before
Was there on Saturday. was told it was the MAIN PCB .( it wasn't of course )
Was also told by vokera it was the transformer and also no
see the problem is. It not getting...
I am going to a boiler on monday.
The landlord has reported that it is showing up fault code 34
he also said that someone else has been out . but couldn't get it going
he tried replacing the
main pcb
and transformer