Hi there,
I have an F05 error code on my hotpoint washing machine and think it related to a blockage.
Would anyone know how I can go about checking to see where the blockage is?
I assume I need to switch off my water from mains before I check?
Thank you!
from photo, are the two stand pipes ok, do they need traps? Would one stand pipe be better, does that need a trap, does it need an air valve? Is the upturn on waste pipe acceptable. Intermittent problems with smell.
hi, i have a 40mm boss connection at the top of a horizontal soil stack that runs in the room. I'm intending to put a washing machine stand pipe at the end of this.
I also have a Vaillant ecotec pro 28 boiler next to where the washing machine will sit and was hoping to get the GSR to reroute...
got a new washing maching delivered this morning (old one taken away).
all was going well with the installation, until i went to connect up the water waste pipe.
the connector that is on the drain u-bend appears to be 23.5mm, but the waste pipe on the washing machine looks like 21mm.
there is...
I’ve got a hot and cold supply in a laundry cupboard. I’m moving the washing machine out and want to install a wash hand basin in the room. Can I utilise the existing washing machine taps and simply fit the flexi tails to them? Thanks in advance!
Hey guys.
What's the best way to absorb washing machine vibrations?
It's currently on a suspended floor and sounds like a rocket take off.
I've got lots of polystyrene I could put underneath to absorb vibrations or any other material you could recommend.
Many thanks
Hi all
I have a washing machine plumbed in next to a built in dishwasher but have an issue with the waste outlet for the washer.
the problem I have discovered (as I did not plumb both in) is that when the dishwasher is in place, it is crushing the washer waste pipe. See photos below.
Because...
Hiya, I live in a housing association flat and just moved in so set up my new washing machine. When I inserted my washing machine waste pipe into the standpipe it instantly overflows when draining, I have tried it in many positions like not bent in, not to deep in or deep in ect just incase it...
Hello.
My father in law has just moved into a new place, and noticed his washing machine was filling up with water. I guessed it was coming back in from the waste pipe so fitted an angled connection to stop the sink water finding its way up and in so to speak. Anyways hes getting a new washing...
Hi all,
I hope you can help. I’ve recently moved into a property and have connected my washing pipe, and it’s washing fine, but leaving my under sink shelves soaked. I think it’s coming from the water source (pictured) and not the waste water pipe. It looks to be screwed on tight so not sure...
Hi,
Hopefully this is an easy fix......
I have moved into a house and some of the work is 'interesting', things you never see when looking originally. Our latest problem is that the sink fills with water when the washing machine empties and also when you empty the adjacent 0.5 sink. The...
When my washing machine pumps out, after about 20 seconds, water starts overflowing out of the top of the downpipe behind the cupboard. I have removed that waste pipe, the ubend and the 90' connector to the off white connection to the down pipe from the sink waste pipework, and there is no...
Hello, I need to disconnect my washing machine for several days however i am confused on how to turn off the cold water flow to the washing machine. I have taken a photo. There is no lever from what i can see. Do anyone know what i need to do with this?
Hi all. We are trying to install a new washing machine in our home. The previous owners had a slot for a washing machine. We noticed that there is only one hose in the wall. I would have expected an inlet for fresh water and an outlet to drain away dirty water. Image attached. How do we use this...
Hi,
I'm attempting to install a washing machine for the first time ... am I right in thinking the cold only fill hose attaches above the little blue lever? - I just undo that brass cap? Thanks for any advice.
(I live in the UK so if supplying products please sugest UK items - many thanks)
I need some advice on how to fit a Washing machine/Dishwasher. Any feedback/ideas would me much appreciated.
Currently the sink is set up with one of these dual sink wash traps (see image or link at the bottom of...
Should it be possible to add a couple of washing machine style tee valves in the middle of these copper pipes?
Forgive the basic question, but I am an inexperienced home owner. Thinking of giving it a try myself today.
Would this risk reducing our tap water flow from the pipes continuing...
Hi, first time on this forum but I could use some washing machine waste advice.
My brother and I are redecorating our entire house, including the rather small kitchen. We'd like to move the washing machine which is currently in the kitchen to make room for a dishwasher.
An ideal location for...
Hi,
We live in a rented property and have recently started having an issue with the kitchen sink. When we using the sink the water drains straight into the washing machine, when the washing machine is on the water bubbles up into the sink. We have tried various unblockers, a drain blaster and a...