anyone know where i can find a 32mm overflow with 80mm waste for old cast iron bath?

[rosieDIY]

hi,

i need a 32mm overflow and 80mm waste trap for a cast iron bath i'm plumbing in, most suppliers do the bath standard of 1 1/2" (38mm) overflow but this is too big.. I haven't been able to find any with 1 1/4" (32mm), only basin but they don't have a big enough waste trap

Just to clarify the 80mm waste trap is the total diameter of the indent in the bottom of the bath for the trap, the hole is actually 2 1/2" (64mm), so could fit anything over 2 1/2" diameter.

all advice most gratefully received 🙂

cheers,

Rosie

 

[ecowarm]

Re: anyone know where i can find a 32mm overflow with 80mm waste for old cast iron ba

Welcome to the forum Rosie.
Contact the bath supplier or manufacturer they will supply one for the bath.

 

[tamz]

Re: anyone know where i can find a 32mm overflow with 80mm waste for old cast iron ba

Use one of these
1½" x 1¼" Waste Outlet Reducer - BSP Female x BSP Male Couplings - Waste Pipe & Fittings | McAlpine Plumbing Products
on any suitable 1 1/2" grating.
If you use one of these types
Deva DW404 017 1 1 2 Chrome Brass Body Bath Waste with Overflow Assembly Brass Plug
you can cut the thread tail to suit.

 

[ecowarm]

Re: anyone know where i can find a 32mm overflow with 80mm waste for old cast iron ba

Sorry miss read, its an old bath

 

[rosieDIY]

Re: anyone know where i can find a 32mm overflow with 80mm waste for old cast iron ba

thanks for your responses
the reducer looks just what i'm looking for, however i think i still may have problems fitting the grate to this as although the reducer would allow the pipe to pass through the hole on the bath, the chrome grate still has a 1 1/2" diameter thread so wouldn't fit the 1 1/4" diameter reducer on the inside of the bath... hmm...
would this mean getting hold of a 1 1/4 " diameter overflow grate? do you know anywhere which sells them separately?
cheers for your help so far!
Rosie

 

[tamz]

Re: anyone know where i can find a 32mm overflow with 80mm waste for old cast iron ba

Do a sketch Rosie so i know exactly what you are doing.