Got a customer with no hot water or heating topped pressure up and was fine on hot water. Put it on heating and pressure goes from 1.2 bar to 2.8 bar in no time at all. I’ve heard about faulty expansion vessels with these. Any ideas? I’m fairly new gas safe engineer and mainly do installs. Any help here would be greatly appreciated, still learning
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "Baxi neta tec overpressurizing" which is posted in Central Heating Forum on UK Plumbers Forums.
D
Deleted member 120897
Expansion related issue, not necessarily the vessel itself. Would look at the communication pipe. Netatec are crap imho.
Start it again in the gas safe only forum and you'll get more advice.
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Baxi neta tec overpressurizing" which is posted in Central Heating Forum on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
Thread starter
- Joined
- Member Type
- General Plumber
Thread Information
Thread Tags
- Tags
- baxi