baxi solo 24 he fault

[farmerhers]

hi all

Had a fault code on the boiler today on-flashing-on which meant flow thermistor fault. checked the thermistore and wiring as per baxi manual an all was well. turned the boiler back on and new fault code appeared on-on-on, wiring harness fault. done a quick visual check and seems ok.
The flow chart after checking the thermistor says that if ok replace the pcb. But was about this wiring fault code? any help would be greatly appreciated.

 

[SimonG]

Get yourself a gsr engineer to sort it.

 

[dancinplumba]

Oh dear looks like you have possibly damaged your PCB, ouch, please call a gas safe registered installer 🙂

 

[Howsie]

You need a GSR engineer to look at your boiler. Have a read of the yellow banner on the first page of this site.

It's for your own saftey : http://www.bbc.co.uk/news/uk-england-tyne-23019830

 

[Dotty]

You need a gsr in to look at your boiler. We cannot and will not give advice on the installation or repair of boilers for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.

Thank you.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html