Bermuda vp gas fire

[simonhick]

Going to look at an old Bermuda vp gas fire and was after advice before visiting.

Ignites ok but will not go onto higher flame settings. Was working ok 6 months when I replaced thermocouple and electro magnet. It is the earlier model without oxy-pilot. Just ignites over burner.

If I check gas pressure and all ok would it mean replacing gas tap??

Thanks

 

[simonhick]

Gas fire bermuda gas fire

Bermuda vp gas fire

Going to look at an old Bermuda vp gas fire and was after advice before visiting.

Ignites ok but will not go onto higher flame settings. Was working ok 6 months when I replaced thermocouple and electro magnet. It is the earlier model without oxy-pilot. Just ignites over burner.

If I check gas pressure and all ok would it mean replacing gas tap??

Thanks​

 

[simonhick]

oops meant to put this on a different forum!!!!!!!

 

[Billy Bob Bob]

oops meant to put this on a different forum!!!!!!!

which one mate i can move it for you

 

[simonhick]

The gas safe register forum
I re posted?

 

[Leo21]

Re: Gas fire bermuda gas fire

Check the injectors are clear first. I think there are two injectors, one could be blocked.

 

[REDSAW]

Re: Gas fire bermuda gas fire

looks like a grease issue to me, its the word!.

 

[GrahamM]

Re: Gas fire bermuda gas fire

As per Leo. My moneys on blocked injector.

 

[simonhick]

Re: Gas fire bermuda gas fire

Thanks Guys. Long days and evenings this week so not managed to reply or check replies.