Big house, big job..money no option - What would you choose?

[ShaunCorbs]

Cascading spreads the load over two boilers rather than shagging one.

yes and no if you size it right you wont have a problem

 

[stevetheplumber]

most important thing with "money no object "jobs is getting paid make sure you have a watertight contract and schedule of payments in place because by the end of the job money always seems to become objective

 

[Gray0689]

Acv cylinder heatmiser controls
Grundfos break tank for mains
Underfloor / all rads on to a manifold with control for every room

 

[Paul - PDS]

Just stick a Biasi in for a laugh

 

[mylocalplumber]

for what your cpa1 ccn1 etc or your codnco1

CODNCO1
CIGA1
lCPN1
TPCP1A

 

[mylocalplumber]

most important thing with "money no object "jobs is getting paid make sure you have a watertight contract and schedule of payments in place because by the end of the job money always seems to become objective

too true!

 

[lame plumber]

seems daft dropping the water content of cyls, I would keep 2 x 210s to ensure you dont get sued down the line for lack of HW

 

[mylocalplumber]

seems daft dropping the water content of cyls, I would keep 2 x 210s to ensure you dont get sued down the line for lack of HW

Never dropping mate. Was going to link 2 250l cylinders

 

[mylocalplumber]

Acv cylinder heatmiser controls
Grundfos break tank for mains
Underfloor / all rads on to a manifold with control for every room

Will definitely go with the ACV cylinder
Heatmiser controls? Only ever installed on UFH. Prob is I would like to zone the heating but would be extremely difficult with current set up which is why I was looking at Evo home by Honeywell.
Grundfos break tank? This is interesting. I have 2.5 bar and 22 lpm+..so would it really be beneficial?
no underfloor heating