Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Boiler controls ??

View the thread, titled "Boiler controls ??" which is posted in Boiler Advice Forum on UK Plumbers Forums.

macka09

Plumbers Arms member
Plumber
Gas Engineer
Hi all.

Do any of you guys fit boilers without a temp stat in place?

3 people I know have had fairly new boilers without any temp controls fitted just mechanical clocks.
 
Depends what else they might have. Trouble with a single stat is finding the right place to put it, too cold a room and the heating's on for longer than it needs, too hot and the rest of the place gets cold once that room is satisfied. Did the boilers concerned have rads with TRVs? or even weather compensation which a lot of boilers offer these days. Makes having a central stat less relevant.
Personally, at home I've got about half my rads with TRVs and a Coster digital chronostat at the top of the stairs (where the original room stat was). Got to replace a couple more rads sometime and get rid of the twin entry valves and fit a few more TRVs, then I can just have the stat for high limit and leave the room temp control to the TRVs.
 
I knew price would be a factor but surely the boilers life expectancy is dramatically reduced when done this way?
 
So basically if the dial is set to 50c as an example, once the flow is at the temp the boiler would shut down?
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Boiler controls ??" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Sponsors

Thread statistics

Created
macka09,
Last reply from
ShaunCorbs,
Replies
14
Views
1,484
Back
Top