Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Yes it's a combi and it has the programmer wired externally but no thermostatYes this should be ok, but check it out first. I’d say being a Baxi, it might not have 24v. Is it a Combi boiler?
We currently have a Siemens RWB27Si Timeswitch connected and I want to connect a Salus IT500 receiver. Just want to know if the wires from the boiler will operate it, with a straight swap?Yes it's a combi and it has the programmer wired externally but no thermostat
currently have a Siemens RWB27Si Timeswitch connected and I want to connect a Salus IT500 receiver. Just want to know if the wires from the boiler will operate it, with a straight swap?Yes this should be ok, but check it out first. I’d say being a Baxi, it might not have 24v. Is it a Combi boiler?
Think I might go for hive v3 now.Might not be a straight swap, but should be doable. I believe Salus are not very good. When you have purchased it, post wiring of the Siemens and we can advise on the wiring.
This what i have done, is it safe to switch on!!!So the current programmer is using terminals 2 & 4 but a video I watched says use 1 & 2 on hive. Will I just swap 2 to 1 and 4 to 3 on new receiver?
View attachment 67416
This what i have done, is it safe to switch on!!!
Reply to the thread, titled "Connect Siemens RWB27Si Timeswitch wireless thermostat to baxi combi boiler." which is posted in Boiler Advice Forum on Plumbers Forums.
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.