Cost of fitting a new kitchen sink.

[adam byrne]

Hi guys, Hope this post is appropriate, if not I will remove immediately. Just had a new kitchen fitted by the Housing Association. Unfortunately, the sink that was fitted isn't very good. It's stainless steel, but the basin side seems to be untreated and dull, and after a few days has marked badly. The draining board is still shiny but it's warped ie: if you push down on it, it clunks and then clunks again when you let go. Anyway, I digress...I'm going to buy a new one and was wondering how much it would cost to be fitted? (ballpark). I've included a pic of basin and pipework. On a side note, I wanted one of those black composite sinks, but have read that they're easily marked and hard to keep clean. Should I stick to the SS sinks? Thanks, Adam 🙂

 

[ShaunCorbs]

I would say under £100 if you supply everything eg new sink taps etc

 

[adam byrne]

I would say under £100 if you supply everything eg new sink taps etc

Thanks Shaun. That seems very reasonable! Cheaper than I thought.

 

[rpm]

Put it on My Builder or similar web site and somebody will do it for £20.😉

 

[adam byrne]

Put it on My Builder or similar web site and somebody will do it for £20.😉

Thanks. Yes have just been looking at My Builder. Although don't think I could pay someone as little as £20 lol. Bit wary of sites like that. Had a bad experience with a tiler from there. I'm sure I was just unlucky though. Thanks again 🙂

 

[Harvest Fields]

I would say under £100 if you supply everything eg new sink taps etc

I would charge a full morning. So add another half to that £100.00