Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Ecostat S - unsecured temperature knob" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Hi All,
The temperature knob on my Hansgrohe Ecostat S shower mixer has been installed insecurely and is loose when pulled, I've looked at the installation instructions and can't see if a part is missing.
Any ideas?
 

Attachments

It is just a push on/ pull off fitting. Although it does kind of clunk on with a positive action.

I suspect it is not being pushed on far enough to click into place, this is usually caused by the chrome sleeve not being pushed fully home onto the brass valve (the sleeve with the ‘snail’ track for the temperature limit mechanism)
 
It is just a push on/ pull off fitting. Although it does kind of clunk on with a positive action.

I suspect it is not being pushed on far enough to click into place, this is usually caused by the chrome sleeve not being pushed fully home onto the brass valve (the sleeve with the ‘snail’ track for the temperature limit mechanism)
Thanks for your reply. I'll have a look.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Ecostat S - unsecured temperature knob" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Member Type
DIY or Homeowner

Thread Information

Title
Ecostat S - unsecured temperature knob
Prefix
N/A
Forum
UK Plumbers Forums
Start date
Last reply date
Replies
2
Unsolved
--

Thread Tags

Tags Tags
None

Thread statistics

Created
Tailpond,
Last reply from
Tailpond,
Replies
2
Views
514

Weekly or Monthly Email Digest

Back
Top