Fast track gas course

[Aire]

If British Gas were to train you up you I would think they would want someone younger rather than someone in there 30s that’s why I was wanting to do fast track course as the apprenticeship takes four years and most company wouldn’t employ a 30 year old apprentice the training course am looking at gives you 7 weeks work placement to get your portfolio built up

The trouble you may have is completing that portfolio in 7 weeks and that all comes down the company they place you with and how many different scenarios they can give you. I'm not saying it's a bad idea, some learn quicker than others. But £7500 is alot of money so I would thourougly look into the course and get it in writing what you will end up with at the end of the course.

 

[Dougie2019]

The trouble you may have is completing that portfolio in 7 weeks and that all comes down the company they place you with and how many different scenarios they can give you. I'm not saying it's a bad idea, some learn quicker than others. But £7500 is alot of money so I would thourougly look into the course and get it in writing what you will end up with at the end of the course.

They have emailed me over all the information what you do on the course and what you get out it if you pass i know its a lot of money to do the course i just weigh up the pros and cons if i could get a job after the etc and its 6 months course going to be enough especially when apprentices do it in four years and are still learninng after that

 

[Aire]

They have emailed me over all the information what you do on the course and what you get out it if you pass i know its a lot of money to do the course i just weigh up the pros and cons if i could get a job after the etc and its 6 months course going to be enough especially when apprentices do it in four years and are still learninng after that

Well if you pass and struggle with employment you can always register with gas safe yourself and become self employed. You'll find the first year after qualification the hardest as you try to get your name out there but if your committed then nothing should stop you making a success of it. Just don't expect it to be easy that's all

 

[Dougie2019]

Well if you pass and struggle with employment you can always register with gas safe yourself and become self employed. You'll find the first year after qualification the hardest as you try to get your name out there but if your committed then nothing should stop you making a success of it. Just don't expect it to be easy that's all

I know it wont be easy am up for the challenge just dont want to be waste a lot of money down the drain thats another thing see if i passed can i apply to be gas safe or do i need a company to do that ? Thanks for the advice

 

[Aire]

I know it wont be easy am up for the challenge just dont want to be waste a lot of money down the drain thats another thing see if i passed can i apply to be gas safe or do i need a company to do that ? Thanks for the advice

What qualification does the course say you will leave with upon completion? That will determine whether you can register with gas safe.

 

[Dougie2019]

CCN1 – This is the core gas safety certificate which all gas operatives must have to work in the domestic gas industry.
CPA1 – Characteristics of combustion and use of a flue gas analyser.
CENWAT – Installation, service repair and commission of domestic central heating boilers and water heaters.
CKR1 – Installation, exchange, disconnection, servicing and repair of domestic gas cooking appliances.
HTR1 - IInstallation, exchange, disconnection, servicing and repair of gas fires and wall heaters.

Qualifications and Training Added to the Course:
Unvented Hot Water Storage Systems – Installation, servicing and maintenance of unvented hot water systems from 15 to 500 litres.
System Design and Fault Finding – Our own system design and fault-finding course aimed at giving you a better understanding of how central heating systems and boilers work.
• Basic Plumbing
• Basic Electrical Appreciation
• Safe Isolation

 

[Aire]

Well if you come out of the course with the mentioned qualifications then yes you will be able to register with gas safe yourself and become self employed. I would recommend that as a last resort though and least try to get a couple of years with a firm to get your experience up.

 

[Dougie2019]

Well if you come out of the course with the mentioned qualifications then yes you will be able to register with gas safe yourself and become self employed. I would recommend that as a last resort though and least try to get a couple of years with a firm to get your experience up.

Thats what i was looking to do get in with a firm get some experience and take it from there do i not need to be with a firm to register as gas safe ? Is there any other qualifications you would recommend?

 

[Aire]

No you don't. If you've got the qualifications you can trade as a sole trader and register with gas safe yourself. As for other qualifications, if your sticking with domestic you shouldn't need anything else. Depending on where you live you can do lpg if there is demand for it in the area.

 

[Dougie2019]

No you don't. If you've got the qualifications you can trade as a sole trader and register with gas safe yourself. As for other qualifications, if your sticking with domestic you shouldn't need anything else. Depending on where you live you can do lpg if there is demand for it in the area.

The plan is just to do domestic and see where that goes tbh am hopeing to get a job with one of the bigger companies to get the experience

 

[Pickwickpick]

CCN1 – This is the core gas safety certificate which all gas operatives must have to work in the domestic gas industry.
CPA1 – Characteristics of combustion and use of a flue gas analyser.
CENWAT – Installation, service repair and commission of domestic central heating boilers and water heaters.
CKR1 – Installation, exchange, disconnection, servicing and repair of domestic gas cooking appliances.
HTR1 - IInstallation, exchange, disconnection, servicing and repair of gas fires and wall heaters.

Qualifications and Training Added to the Course:
Unvented Hot Water Storage Systems – Installation, servicing and maintenance of unvented hot water systems from 15 to 500 litres.
System Design and Fault Finding – Our own system design and fault-finding course aimed at giving you a better understanding of how central heating systems and boilers work.
• Basic Plumbing
• Basic Electrical Appreciation
• Safe Isolation

The info they've sent you isn't up to date, you have to have been gas safe registered for 6 months before you can CKR1 and same applies for HTR1:

A Category 1 engineer who wishes to add another appliance element to their qualifications (i.e. extend their range in the same sector) would need to meet the following criteria before they can be assessed in that appliance:

• They must have been registered with Gas Safe for a minimum of six months
• They must undertake training on the new appliance element they wish to add
• They need to supply evidence of on-site experience of the appliance element; if this is not possible the candidate will need to undertake ‘realistic work environment’ practical work at a training centre in addition to the training stated above

Information for Category 1 gas engineering candidates as of 1 October 2018

 

[Aire]

Thats a reason to query to the cost. If your not going to finish the course with all qualifications advertised then that should reflect in the cost of the course. I'd also wonder why a training centre isn't up to date with the current requirements regarding gas safe registration.

 

[Dougie2019]

The info they've sent you isn't up to date, you have to have been gas safe registered for 6 months before you can CKR1 and same applies for HTR1:


Information for Category 1 gas engineering candidates as of 1 October 2018

Yeah the company did say that when j was talking to them they said they get you back in and get you refreshed

 

[Aire]

In that case, ignore my previous comment 🙄

 

[Harvest Fields]

The info they've sent you isn't up to date, you have to have been gas safe registered for 6 months before you can CKR1 and same applies for HTR1:


Information for Category 1 gas engineering candidates as of 1 October 2018

How does that make sense. Surely he is category 3? The six months is for someone already qualified isn’t it?

 

[Harvest Fields]

CCN1 – This is the core gas safety certificate which all gas operatives must have to work in the domestic gas industry.
CPA1 – Characteristics of combustion and use of a flue gas analyser.
CENWAT – Installation, service repair and commission of domestic central heating boilers and water heaters.
CKR1 – Installation, exchange, disconnection, servicing and repair of domestic gas cooking appliances.
HTR1 - IInstallation, exchange, disconnection, servicing and repair of gas fires and wall heaters.

Qualifications and Training Added to the Course:
Unvented Hot Water Storage Systems – Installation, servicing and maintenance of unvented hot water systems from 15 to 500 litres.
System Design and Fault Finding – Our own system design and fault-finding course aimed at giving you a better understanding of how central heating systems and boilers work.
• Basic Plumbing
• Basic Electrical Appreciation
• Safe Isolation

I would also advise met1. Just incase no one else has.

 

[Dougie2019]

I would also advise met1. Just incase no one else has.

What course is met1 whats involved in that?

 

[Harvest Fields]

What course is met1 whats inviled in that?

It is for gas meters.

 

[Dougie2019]

It is for gas meters.

Yeah that coirse would be handy actually that could be something i could do in bewteen waiting to do my acs

 

[Harvest Fields]

Yeah that coirse would be handy actually that could be something i could do in bewteen waiting to do my acs

If you add it all together you should get a discount.