Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Dec 19, 2013
8,627
5,854
113
The center of the universe
EB42167A-E74A-4526-B3A7-543C122CC985.jpeg
.

Got caught out with this job today . No isolation valve , stoptap wouldnt shut off, had to take cistern off a 40 ish year old pan and replace syphon , easy job eh .
Battled and put a Dudley on, new fill valve , handle etc etc.
But the bleeding thing will not flush properly , its obviously a syphonic and doesnt like the new syphon .
In the bottom of the old syphon is the “thing “ in the picture , its nact , covers a hole in the pan where the water enters .
Never seen one before , can I block it up ? , any ideas how to get it working , or am I flogging a dead orse ?

As usual , thanks in advance
 
  • Like
Reactions: Phil
How I have never come up against one of these absolutely baffles me
If you mean the toilet, you can tell by looking at the pan side on. Brilliant idea and great flush as you will see in time, generally last for donkeys of years without fault.
How old are you in Donkey years? 😉
 
  • Like
Reactions: Best
If you mean the toilet, you can tell by looking at the pan side on. Brilliant idea and great flush as you will see in time, generally last for donkeys of years without fault.
How old are you in Donkey years? 😉

Lol , bleeding old git status , I have seen loads of syphonics just not the aspirators.
 

Official Sponsors of Plumbers Talk

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.