Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Fitting temperature stop concealed shower" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Matt0029

Gas Engineer
How do you set this on a concealed shower cartilage is it ment to be so that when the shower is at its hottest the knob is at the 12 o'clock position. Then you have to press the button on to move it further. So the shower goes hotter then 38degrees c.
 
It's a a line on the splines wondered if this was anything to do with it?
 

Attachments

  • IMG20250124220314.jpg
Use a thermometer to set the temp before putting the dial on eg 38c set dial to 38c etc
 
Thanks how do you set the dial
[automerge]1737787723[/automerge]
It has a plastic over clip like this should it be lined up so you cant move it past 38c without pressing the button down?
[automerge]1737924551[/automerge]
Figures it out the stop on these are a total stop unlike a bar shower where you can press the button in at 38c to make it go hotter
 

Attachments

Last edited:

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Fitting temperature stop concealed shower" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Matt0029

Gas Engineer
Joined
Location
leeds
Member Type
Heating Engineer (Has GSR)

Thread Information

Title
Fitting temperature stop concealed shower
Prefix
N/A
Forum
UK Plumbers Forums
Start date
Last reply date
Replies
3

Thread Tags

Tags Tags
None

Thread statistics

Created
Matt0029,
Last reply from
Matt0029,
Replies
3
Views
188

Weekly or Monthly Email Digest

Back
Top