Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

B

buckley plumb

Went to this fire today customer asked me to check as builder prised fire forward to fit new marble panel. The flue is cemented outside so no movement yet I could prise fire forward upto 1" . I used analyser to test around fire case and got 10ppm but air was 20.9 and co2 0. This has puzzled me a bit my analyser is s tpi 709. Anyone got any ideas.should say flavel damn auto spell
 
Last edited by a moderator:
I assume you zeroed in fresh air. No one been smoking in room recently?
Could be the flue connection at rear needing checked.
 
yes mate zeroed in air only getting ppm by fire elsewhere in room zero , going back to take out fire I think they have pulled the seal apart slightly

I assume you zeroed in fresh air. No one been smoking in room recently?
Could be the flue connection at rear needing checked.
 

Official Sponsors of Plumbers Talk

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.