Flow rate of LPG bottle

[alexic82]

Hi Guys

Not sure if this is the correct area to post?

Firstly, i'm not doing this work myself but I need to get a question answered as it impacts an outdoor kitchen slab i'm going to pour and need to run pipe or conduit under it.

Having a commercial LPG griddle installed on the outdoor kitchen instead of a crappy bbq. Its total flow rate is 75mJ/h. Trying to work out if I can use a 9kg bottle or will I need a 45kg bottle to run it. I just need to consider the physical space for the bottle. Yes I would contact a gas plumber but we live in regional WA and its a 2 month wait ....

Thankyou

 

[ShaunCorbs]

I would go 45kg as your draw off eg load is too high for 9kg

 

[alexic82]

I would go 45kg as your draw off eg load is too high for 9kg

Roger that thankyou.
Also, would it be a pain in the arse for a gas plumber if I was to run the appropriate hose under the benchtop and out to where I want the bottle so I can get on with pouring this slab?

 

[ShaunCorbs]

He might want to install it himself best have a word first as it could save you later on

 

[alexic82]

He might want to install it himself best have a word first as it could save you later on

Yea will do, just a pain in the date out here trying to get someone here....all good. thanks for the advice.