flue gas analyser calibration

[steveafoss]

Need to get my flue gas analyser calibrated any recommendations would be helpful thanks.

Steve

 

[Halesowen1]

http://www.jmwlimited.co.uk/index.html

 

[Halesowen1]

These are very good.

 

[dontknowitall]

I second that. Have used them twice and bought my second fga from them.

 

[steveafoss]

Contacted JMW to inquire about cost to get my Measter tested email back from them was to old buy a new one. Contacted GES they helpful so paid them a visit but could not do anything as parts no longer available. They told me about Kane (2 mins away from them) as kane had brought Measter out years ago. Got offered a trade so have got a Kane 455 for £319 plus my Measter printer works with it.:28:

 

[Halesowen1]

So JMW were correct then. All the companies are doing deals now and trade ins. I have 2 x TPI712 for sale. Was offered a deal but going to sell on my own. I am going to get the new Antons.

 

[steveafoss]

Yes JMW were correct but GES seemed more helpfull and did have a look to see if it was possible to get parts. Plus side i paid £54 for analyser with printer got £80 for trade in and kept printer, probe & case. You will sell TP712 on ebay with no problems are they both working.

 

[Halesowen1]

Yes, both just been calibrated too, with all sensors changed, cost me £210 for each one.
Both have sold today but 1 guy is messing about.

 

[anth001]

i just drop mine into parts centre...5 day turn around