Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Flueing and Ventilation Situation Classification - Commercial Boiler Room" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Status
Not open for further replies.

arfurdaley

Gas Engineer
Got a couple of situations just wondering if any commercial guys could give me some advice on classifications.

1. Nine Hamworthy UR 430 open flued boilers connected to one flue. Think the maximum should be six.
Everything ok, burner pressure, gas rate, flue flow, no spillage with all boilers running, combustion analysis
good. Has been classified AR previously.

2. Ventilation requirement in plantroom is 2000cm at Low level, 1000cm at High Level. Plantroom has total ventilation of 4500cm but most of it (4000cm) is at high level. Does the fact that the there is enough total free airspace make it NCS? or should it be upgraded to AR?

Cheers guys
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Flueing and Ventilation Situation Classification - Commercial Boiler Room" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top