Good or bad idea - would you like it and be Interested in?

[Harvest Fields]

How is that? If I am guided with another engineer who is doing with me my portfolio I am as he will have to make sure it’s all done to spec.

Then YOU didn’t install it. YOU said I in your post. I means you alone. WE means you and somebody else.

 

[Sharp Point]

View attachment 37355 There you go Ron , 200 Viessmann

Absolute brilliant bit of kit, I’ve put about 4 of these in now

 

[townfanjon]

That’s definitely art mate, you even can fit a washing machine in that corner 🙂 have you ever serviced the 200 one? Never done that yet and I am wondering how easy it is to get the burner our and service the boiler properly ?

Easiest boiler to service ever .. a bit of clever joinery and it all disappears.

 

[Old Account]

Then YOU didn’t install it. YOU said I in your post. I means you alone. WE means you and somebody else.

No, he kept watching that’s all. However, I don’t need to discuss that any further.
Have a nice evening

 

[Sharp Point]

Then YOU didn’t install it. YOU said I in your post. I means you alone. WE means you and somebody else.

HF, leave the lad alone lol. Go finish your beer😀

 

[townfanjon]

I’m registered too but will need to do the course next week to be able to give 10 years warranty

The 200 course is a seperate one pal , I think you can only go to 5 years on the 200 , 100 can go to 10 years

 

[Old Account]

View attachment 37357

Easiest boiler to service ever .. a bit of clever joinery and it all disappears.

That’s definitely neatly done though. Amazing how you put that all in one corner

 

[Sharp Point]

As the ball’s started rolling, here’s an old install on a new build I did about 4 years ago. I went round and did the annual gas service

 

[Sharp Point]

A current job of mine, nearly finished

Poor picture, the plant room is tiny

 

[Old Account]

By the way that’s the way I do a service to a Worcester boiler @scott_d as we recently had a conversation if I remember well

 

[Old Account]

A current job of mine, nearly finished

View attachment 37359

Poor picture, the plant room is tiny

How much stuff you have tut in there, hardly any space haven’t you.

 

[Old Account]

As the ball’s started rolling, here’s an old install on a new build I did about 4 years ago. I went round and did the annual gas service

View attachment 37358

Nice testo fga

 

[Scott_D]

By the way that’s the way I do a service to a Worcester boiler @scott_d as we recently had a conversation if I remember well

Did you replace the heat exchanger or take it out to clean?

 

[Old Account]

Did you replace the heat exchanger or take it out to clean?

Just took out to clean. 10min and you are good to go with brushing through and flushing out the debris.

 

[townfanjon]

By the way that’s the way I do a service to a Worcester boiler @scott_d as we recently had a conversation if I remember well

View attachment 37360

View attachment 37361

View attachment 37362

View attachment 37363

4 more reasons I love Viessmann

 

[Harvest Fields]

No, he kept watching that’s all. However, I don’t need to discuss that any further.
Have a nice evening

Why don’t you? Clear case of back tracking one thinks here.

 

[Old Account]

4 more reasons I love Viessmann

I have to say, i really enjoy it to take the boiler a little apart and get that cleaned up. It’s really easy, fast and straight forward.

 

[Harvest Fields]

HF, leave the lad alone lol. Go finish your beer😀

Beer is a yes mate. But we hammer everyone else that works on boilers unregistered.

 

[ShaunCorbs]

A current job of mine, nearly finished

View attachment 37359

Poor picture, the plant room is tiny

nice ht tank

 

[Sharp Point]

Why don’t you? Clear case of back tracking one thinks here.

Harvest, go finish your flipping beer ....

 

[Old Account]

Why don’t you? Clear case of back tracking one thinks here.

Don’t know what you are on about mate. Instead of hating and judging all the times give some positive vibes or are you just on a look out for problems. Seems like it to me mate

 

[Old Account]

Beer is a yes mate. But we hammer everyone else that works on boilers unregistered.

Then keep hammering

 

[Sharp Point]

nice ht tank

Thanks Shaun, I made it. Tig welded it up out of aluminium

 

[Sharp Point]

Beer is a yes mate. But we hammer everyone else that works on boilers unregistered.

We’ve all done it, broke law once or twice. The thing is, not to make a habit of it.

 

[ShaunCorbs]

Thanks Shaun, I made it. Tig welded it up out of aluminium

what pump you using and bent two sides i believe ?

 

[Sharp Point]

what pump you using and bent two sides i believe ?

Pump?

Yes, the sides are two pieces folded and then tig’d together and then a bottom welded on.

 

[Harvest Fields]

Don’t know what you are on about mate. Instead of hating and judging all the times give some positive vibes or are you just on a look out for problems. Seems like it to me mate

Not hating mate. Your missing my point. THAT IT IS NOT YOUR INSTALL. IT IS HIS!

 

[ShaunCorbs]

i do some weird stuff will put a few pics below

 

[Harvest Fields]

We’ve all done it, broke law once or twice. The thing is, not to make a habit of it.

No we haven’t mate.

 

[Scott_D]

Pump?

Yes, the sides are two pieces folded and then tig’d together and then a bottom welded on.

Many leaks on your welds?😛

 

[ShaunCorbs]

now some bad

 

[Old Account]

Not hating mate. Your missing my point. THAT IT IS NOT YOUR I STALL. IT IS HIS!

Alright whatever show me yours

 

[Scott_D]

Looks like the incoming so not your side but what’s going on with the flanges off the blue valve? @ShaunCorbs

 

[Sharp Point]

No we haven’t mate.

We? So you’re talking on behalf of everyone on the forum?

 

[Harvest Fields]

Alright whatever show me yours

Dont normally take pics mate. But will on the next one.