Has anyone used this SDS drill....

[Guest123]

I fancy a wee splash out on this drill as outside tap season is almost upon us again:
[h=1]DeWalt D25123K-LX 2.6kg SDS Plus Hammer Drill 110V
[/h]I like it for the fact that it drills up to 26mm in masonry and is a lot lighter than my big SDS drill. My preference for power tools is Dewalt and all my kit is this make.

I use a 22mm drill bit for outside taps which is perfect for the 15mm copper pipe enclosed in a plastic overflow sleeve going through the wall.

Anyone got one or has used one. Opinions appreciated before i buy. Cheers.

 

[Barry98]

nope ive got a DEWALT 24V DRILL/HAMMER DRILL SDS DW005 , bought of ebay by mistake. last week like new though. pretty good drill

 

[dancinplumba]

were you drunk wen you bid on it bod ? lol

 

[Barry98]

no , id put a post up regarding my bosch one dying , kev the gas, had one so i bought his , then the one on ebay was the next street along from where we were doing a job so i went had a look and thought if i can get for under 150 ill have it as a backup incase my bosch one goes again.so i ended up with 2 drills.

now looking for a cheap cordless angle grinder lol

 

[PlumbBobBob]

now looking for a cheap cordless angle grinder lol

you know you're going to end up with two now

 

[Barry98]

i have a corded one but when we got on about cutting flues other day i thought (rare but true) and after watching a certain video got to thinking how handy it would be to just whisk a cordles one out and have done.

 

[AWheating]

i have a dewalt 240v sds, older version. Its very good. the one your looking has got good reviews, you may find a video review on youtube? its got 3.4j impact power so should be quite good at chiseling too, i think its a good choice. I like dewalt drills, they tend to last and have less plastic in the gearboxes/internals which is good.

 

[Guest123]

Bought this drill today and it goes through walls like they are not there! Pleased with it and would highly recommend it.