Hello everybody, Just checking out whats up

[russell armstrong]

Hi everyone

Used to be a regular here three/four years ago and decided Id give it another whirl
My linkedIn profile gives you my lowdown
https://www.linkedin.com/in/russell-armstrong-mciphe-a6356186/
Speak soon
Russell

 

[Vee]

What size does hot tun go up to now. Found it splashes and overflows when full discharge on smaller ones.

 

[russell armstrong]

Hi Vee
The rated steady state flow for the range is
hotun 15/22 - 12LPM
hotun hiflo 15/32 18LPM

The new sf range should be as follows (like the hiflo we are getting the flows independently tested)
hotun sf 15/22 - 16LPM
hotun hiflo sf 15/32 - 25LPM
hotun xlsf 22/32 - 35-40LPM

I am always happy to look into any problems you may be or have experienced
Its invaluable that installers give us feedback (positive or otherwise) because there are so many more ways to install the products than we can test for and if they are not working for you, it gives us invaluable experience to work out what is happening
Please DM me your phone number to have a chat
Dont want or need to hide anything but a technical discussion is better suited to a call rather than written. Ince we have had the discussion we can post back our findings on the forum so all can see/learn
Gravity hydraulic flow is not straight forward especially as volume increases many factors come into play

 

[ShaunCorbs]

@YorkshireDave