Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Mar 12, 2018
59
1
8
43
Nottingham
Member Type
DIY or Homeowner
Evening gents

I have a Worcester green star ri controlled by a Honeywell st9420c controller and wireless thermostat

All working fine this morning now when home from work I’m getting no heating. The light is on on the controller and the digital thermostat is showing the fire symbol but there’s no heating working at all

Hot water is heating up apparently fine and the boiler will periodically fire up and then stop again about 10 seconds later

Any ideas? Had a new grundfos pump and switch fitted 18 months ago

Thanks a lot in advance
 
Do you have a hot water cylinder and zone valves as below ? It may be a faulty head on the heating valve it may be possible to lock the head open its a common fault the motor may be burnt out or the linkage worn so not triggering the micro switch when it moved over . Kop
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.