Honeywell 3 way power head

[greendamo]

Hi,
I Have a Honeywell 3 way power head that the motor seems to have died, my question is can the power head be replaced on this particular model or will i need to change the whole valve?

 

[ShaunCorbs]

Does it have a dimple in the top cover ?

 

[greendamo]

Does it have a dimple in the top cover ?

Not that i can see, but i don't think its a pre 1985 model although i could be wrong.

 

[ShaunCorbs]

Not that i can see, but i don't think its a pre 1985 model although i could be wrong.

Easy way to confirm is there 4 screws or two screws holding the silver box onto the brass body

4 screws have to change whole valve eg drain down

2 screws just head

 

[greendamo]

Easy way to confirm is there 4 screws or two screws holding the silver box onto the brass body

4 screws have to change whole valve eg drain down

2 screws just head

Thanks Shaun,
Ill have to look when I'm back home as i cant see from the photos I've got on me.
I'm really hoping i don't have to drain down as i want a quick fix! I'm also hoping it is actually the motor.. it heats the hot water tank but wont heat the rads but i could get over it by pushing and holding the lever towards manual side and after a few grinding buzzing noises it would eventually click over and then the boiler would boost up and heat the rads??

 

[Last Plumber]

You can just buy a motor.

 

[greendamo]

You can just buy a motor.

Id like to be able to take the whole head off to see if it could also be a sticky spindle tho.

 

[Gasmk1]

If you can move the lever easily it’s not a sticking valve 99% it will be the motor