Hi guys, looking for some advice. Ill try and keep it short as possible.
Just installed new combi, replacement like for like in a huge house. The house has 2 separate boilers, one feeds 2 downstairs levels and ive changed the boiler which feeds 2 upstairs levels.
My boiler also zones for unvented cylinder and feeds one bathroom straight from boiler. Personally i would just have changed to system boiler but this is what customer wanted.
My problem is that after shutting off stopcock, 3 sets of taps now arent running, dribble at most plus one of the mixer showers arent running either. Both hot and cold on taps not working. Its all mains pressure so should rule out airlock and in the other 7 bathrooms or so everything is perfect. Im thinking blockage but surely not in both hot and cold feeding the exact 3 taps. Any ideas guys?? Thanks Paul
Just installed new combi, replacement like for like in a huge house. The house has 2 separate boilers, one feeds 2 downstairs levels and ive changed the boiler which feeds 2 upstairs levels.
My boiler also zones for unvented cylinder and feeds one bathroom straight from boiler. Personally i would just have changed to system boiler but this is what customer wanted.
My problem is that after shutting off stopcock, 3 sets of taps now arent running, dribble at most plus one of the mixer showers arent running either. Both hot and cold on taps not working. Its all mains pressure so should rule out airlock and in the other 7 bathrooms or so everything is perfect. Im thinking blockage but surely not in both hot and cold feeding the exact 3 taps. Any ideas guys?? Thanks Paul
