Hi
I read the thread below:
Fitting a Saniflo....slightly off-spec.
I have a very similar issue. I have an out house at the back of my garden and we want to install a toilet and basin in. To the nearest foul sewer is 60m with a slight bend and a gradual upward gradient of 1m.
I saw the products recommended on the thread (i.e. KSB Pump) and wondered if there were some cheaper/other methods to overcome my issue.
I asked saniflo technical if they had a product and they advised I bought the below from pump technology:
https://www.pumptechnology.co.uk/flushmaster/
However the flush master wouldn't cover the distance needed.
Would really appreciate any advise.
Thanks
EK
I read the thread below:
Fitting a Saniflo....slightly off-spec.
I have a very similar issue. I have an out house at the back of my garden and we want to install a toilet and basin in. To the nearest foul sewer is 60m with a slight bend and a gradual upward gradient of 1m.
I saw the products recommended on the thread (i.e. KSB Pump) and wondered if there were some cheaper/other methods to overcome my issue.
I asked saniflo technical if they had a product and they advised I bought the below from pump technology:
https://www.pumptechnology.co.uk/flushmaster/
However the flush master wouldn't cover the distance needed.
Would really appreciate any advise.
Thanks
EK
