Ideal logic combi + fault display

[zeebeedee]

How do you bring the fault codes up on these? Going to look at a friends later they need to reset it everyday. Will probably be L2 or L1 as it mostly is on the logics. They are saying they can't see a fault code on the display when it needs to be reset. I could with knowing the code so I can go with parts

 

[Scott_D]

It's something like hold the right hand dual at resetfir 5 seconds and it enters installer level

Best to download the correct manual though as logic and logic plus are slightly different

 

[Alpha man]

They won't give any fault codes, but to put it into installer mode, turn the HW and CH knobs to zero, then turn and hold the selector knob to reset/ restart for about 3-5 seconds and that will be in installer mode and will give you the fault/s.