A
alana
Dear readers - I am not a plumber but do have a bit of technical savvy to seek your help and take your advice. Following problems with my Linear 28 boiler with a blocked expansion vessel pipe last winter I was advised by Vokera to undertake chemically flush the system. I am now planning to do that but on swithing on the heating system I note that the pressure in the boiler rose from 1.5 bar (normal) to 2.5 bar. Can you advise a) Should I ignore this or b) Is it signs of a more serious defect requiring attention from a specialist.
Thank you for your on these matters.
Thank you for your on these matters.