Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Installing new central heating pipework, 10 rad system.

View the thread, titled "Installing new central heating pipework, 10 rad system." which is posted in Central Heating Forum on UK Plumbers Forums.

you must be mate ...... last year working for HA I have fitted between 5 to 6 boilers per week , and none of my work was fitted from the drive way 🙂 if you know what i mean all pipe straight and all soldered joint cleaned

I can definitely buy a boiler a day, I've seen that done with my own eyes but can you really do a 10 rad system pipework in 2 days??
 
Yah, it most likely is a bit of a stretch at 8 days if I'm being honest. It's a fixed price for the labour though. Do you guys factor in your time spent quoting and designing the system into your labour costs though?

No i dont just make it up as i go along with domestics dont even bother looking at them any more
 
Seems a bit in the steep side, but iff you can get it fair play. We should all be on that sort of money. Eight days is a little long to, me and my old dad would walk it in four days.
 
yep its about a £500 labour change over here for back boiler here

why i dont bother with domestic now rates are pants

H/A only for domestics at least home by twelve or so
that is cheap ? i was paid about £360 by the HA for same work + meterage for pipe work and other extras ......
I would not change a back boiler to new location for less then 1k honestly
 
That was directed at hammer btw not you SGI 🙂

If you were willing to do that at £200 day rate I would get no end of work for you up here SGI!
 
Yep half day on a bungalow use to work as part of a team doing heat packs 10 plus a week would take us half day to do a bungalow or a flat ,
that was ten year ago tho prob slip a disk now !!!
 
Yah I did - I was joking with you 🙂 Just saying that if you installed these systems for £400 you would never be out of work ever.
when I said piping i did mean running all pipe in loft and clip them and do all drops ,

I am a foreigner but I dont work for nothing like the other immigrants
 
Hehe. Ok, we have established that I'm expensive! The weird thing I am noticing though is the more I charge the more booked up I am getting. Seriously. I have upped my prices quite a bit this year and for the first year ever I am booking 3 months ahead.

Hope this gives anyone the confidence to wack on a bit more on your prices.

Will let you know if I get this one!
 
It took me and 4 other plumbers to fit a 35kw heat only boiler, 28 - 22 -15mm piping (huge runs) and drill the required holes from room to room and hang 19 rads, 5 days and it was a 12k job
 
8 days to do heating on a bungalow for 2 men - just done one in 2 days all copper drops. can be your apprentice
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Installing new central heating pipework, 10 rad system." which is posted in Central Heating Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread statistics

Created
cr0ft,
Last reply from
SafeGasInstall,
Replies
77
Views
1,491
Back
Top