Is this possible with a combi ?

[bacon_sandwich]

Hi guys, I have a job going on in a factory which has an old oil fired boiler, gravity fed radiators only, i.e. no hot water. I am scrapping the oil fired boiler and installing a combi on NG, however the clients priority is hot water and I am relocating the boiler so to get them up and running with continuous hot water is quick, sorting out all the existing radiator plumbing is not.

So - can I get combi going without water in the radiator section or will it throw a strop ?

thx

 

[ShaunCorbs]

no only one that i know of is intergas cant you rig up a temp system with a min kw rad?

 

[gassafe]

Won't take long to put a temporary loop in the flow & return, allows you to fill the boiler etc

 

[bacon_sandwich]

actually yes I could put a loop in and make sure CH is never set on the controller, good thinking

 

[newcastle phill]

Just make a quick loop between FnR

 

[newcastle phill]

Even is the Ch was set to on it would just cycle off pretty quick