Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Johnson & Starley Aquair 80 Service

View the thread, titled "Johnson & Starley Aquair 80 Service" which is posted in Air Sourced Heat Pumps Advice Forum on UK Plumbers Forums.

Keefy

Esteemed
Plumber
Subscribed
I live in a multi-story dwelling with a Johnson & Starley Aquair 80 warm air system. It's due for a service tomorrow by the HA's contractor but I suspect they'll once again (as in the previous 2 services) just send someone out with an engineering degree in Henry Hoovers.
They usually just hoover the lint from the slide out mesh filter which I do on a regular basis and check the electrics - that's it. Here's some pics of how it looks today so if you were the service engineer coming to check it tomorrow, what would you do? Or rather, what should they do apart from hoover the filter and check the electrics?

Warm_Air 007.jpgWarm_Air 004.jpgWarm_Air 005.jpgWarm_Air 006.jpg
 
Last edited:
Neither. Basically it is just a heat exchanger with a fan. The hot water is supplied from a central plant room.

There is nothing much to do on them except clean them and i doubt if whoever comes to service it would show much interest in fixing the crusted diverter but you could ask him to note it needs doing.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Johnson & Starley Aquair 80 Service" which is posted in Air Sourced Heat Pumps Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread statistics

Created
Keefy,
Last reply from
stevetheplumber,
Replies
3
Views
3,348
Back
Top