Laing circulating pumps?

[johntheplumb]

I'm having a problem with a pulsar in floor heating system. The circulating pump has packed in and with pulsar after folding I have no idea where I can get my hand on a replacement pump. The pump body can not be replaced because its part of the mould in the manifold. Its a Laing circulator type A53966. Dose anyone know if the pump motor is interchangeable with any of the mainstream brands.

 

[SimonJohns]

Any photos?

 

[snowhead]

Could you add a pump on the end of the manifold and take the impellor off the old one?

 

[JusKel]

I'm having a problem with a pulsar in floor heating system. The circulating pump has packed in and with pulsar after folding I have no idea where I can get my hand on a replacement pump. The pump body can not be replaced because its part of the mould in the manifold. Its a Laing circulator type A53966. Dose anyone know if the pump motor is interchangeable with any of the mainstream brands.

I just replaced one. I got it in Xylem who took over these pumps.
Theyre based in tallaght, dublin.
You might have to go through a supplier to get it. Some of these places
Dont deal direct with the public.
Im looking for an installation manual for the KR10 controller if you have one ?