Mixer tap leaking from base of spout

[typody]

Hi, I am after a bit of advice on a leaking mixer tap in the kitchen.

Water is leaking from the area highlighted and varies with the amount of water pressure when using the taps, that might seem obvious, but I am not DIY minded 🙂.

I have removed the mixer and replaced both O rings on the base but it's still leaking, although maybe slightly less. Any suggestions would be welcome. I have I just got the wrong size washers? I did match them when they were replaced.

I have done some research, and everything points to it just being those o rings.

Thanks

 

[Deleted member 120897]

Yep, I would say it’s the o-rings. Before splashing out on some new ones, try some ptfe tape around the existing ones.

 

[typody]

Cheers, I will give it a go. The local plumbers merchant replaced the o rings for free but it still leaked.