MT10 Timer not working

[Haplo]

I have a Worcester Bosch 30cdi Boiler with a MT10 Mechanical Timer fitted, the problem I have is that the Timer seems not to be working, the clock ticks round as normal, but the heating does not come on at the specified times, I have even advanced the clock to start and stop times but nothing happens, any ideas before I spend money on another one.

Thanks

 

[diamondgas]

:welcome: to the forum Haplo 🙂

Can you get the heating to come on at all?

 

[thereisawizza]

I had one of these last week, was running the clock but not sending a signal, start off with brand spanker batteries (not ones robbed from the remote!)

 

[Haplo]

Thanks for your reply, the heating seems to be on constantly on timer setting and at the moment is being regulated by the thermostat

 

[diamondgas]

What type of thermostat are you talking about here Haplo, room thermostat? And if so is it mechanical or electronoc? reason i ask is it may pay to considder changing that to a programmable one rather than go to the expense of replacing the integral timer IMO!

 

[Haplo]

its a room mechanical thermostat situated in hall way, this was installed at same time as boiler around 3 years ago. From what i have been told the boiler was left on constant and regulated via thermostat by previous owner.

 

[diamondgas]

its a room mechanical thermostat situated in hall way, this was installed at same time as boiler around 3 years ago. From what i have been told the boiler was left on constant and regulated via thermostat by previous owner.

If you can post a picture of it or have the details, make and model, we could then advise on a suitable programmable stat if for no other reason than to give you an alternative choice for regulating time and temperature. 🙂

 

[sparkygas]

Hi Haplo, your choices are the MT10 unit has failed or the pcb has failed at the timer/on off-room stat interface terminals. 99 per cent its the MT10 which has failed, unless you have the tappets in the wrong position... I have encountered all of these. Here's a handy link MT10 Mechanical Timer - YouTube

 

[Haplo]

Unfortunately I am not at that property, and unable to get any info at the moment, Thanks for your advise anyway and hopefully be able to continue this sometime in the future.

 

[P J F PLUMBING]

its very common this model fails ive change a few just out of warntee

 

[thereisawizza]

Doh! I'm thinking of the MT10rf...

 

[Haplo]

Doh! I'm thinking of the MT10rf...

no worries mate, had me thinking for a while tho