Nerrad Jet Sweat..... ;-)

[Bunker]

Sorry Mods, but this is a good question:

AND NO HIJACKING the thread talking about the company, just this single product please:

Reason is, I found this (I think it was Killy that mentioned it)...:

Water Stopper Pipe Tool for Pipe Repair is at PlumbingSupply.com®

Which looks better in principle than the jet sweat and alot cheaper too. Only trub is, its in America. I may buy one and see, just to test. I like the fact it can go round bends.

 

[Killy Bing]

Would be nice for soldering up rad tails when it goes int the floor.
abit of 10mm plasic to hoover out the small section.

that wont take any pressure through.

 

[Bunker]

that wont take any pressure through.

No but its often not about pressure (although it will build up of course), its just to stop that annoying trickle stopping you from soldering.

 

[Killy Bing]

You see, im silly and want one for live pipes 😛

*grins*

don't you need one for boiler aavs !? 😉

how is your arm now?


i already have the nerrads anyway :/

 

[gassafe]

This tool could be a life saver... Please buy one bunker & review it or I may have too!

 

[snowhead]

You see, im silly and want one for live pipes 😛
😉

Only available for 1. 1/2" pipes and up;

[DLMURL="http://pipemanproducts.com/proddetail.php?prod=1-1%2F2JetSwetFlo-Thru"]1-1/2" Jet Swet Flo-Thru Plumbing Plug #1295, Jet Swet Flo-Thrus[/DLMURL]

 

[Killy Bing]

Only available for 1. 1/2" pipes and up;

[DLMURL="http://pipemanproducts.com/proddetail.php?prod=1-1%2F2JetSwetFlo-Thru"]1-1/2" Jet Swet Flo-Thru Plumbing Plug #1295, Jet Swet Flo-Thrus[/DLMURL]

i have 15, 22 and 28.

good for if you want to hoover out a section out of if water is dripping in from another section but no way suitable for live work.

does hole back up to 3 bar fine......

 

[Bunker]

Only available for 1. 1/2" pipes and up;

[DLMURL="http://pipemanproducts.com/proddetail.php?prod=1-1%2F2JetSwetFlo-Thru"]1-1/2" Jet Swet Flo-Thru Plumbing Plug #1295, Jet Swet Flo-Thrus[/DLMURL]

Ah they do the Nerad ones too, but more expensive. Hurrah for Nerad!! (D'oh....sorry Croppie 🙂 )

 

[Mickyplumb]

Man alive, those flo-throughs are amazing, Nerrad keep them too up to 6 inch but only a water board product i think ?