I'm lost 😕 😀
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Nerrad tap wrench kit
- Thread starter Phil
- Start date
View the thread, titled "Nerrad tap wrench kit" which is posted in UK Plumbers Forums on UK Plumbers Forums.
W
Welder
Shaun charges too little 😕 cos he's too kind.
I'd charge a minimum of £20 a cart. Recently did two taps on back of a bath @£200 the pair. Saved the cust £1000 as he'd been quoted £1200 for bath out retile etc 🙂
I'd charge a minimum of £20 a cart. Recently did two taps on back of a bath @£200 the pair. Saved the cust £1000 as he'd been quoted £1200 for bath out retile etc 🙂
W
Welder
An early version Shaun. We used to use adhesive to glue in the spindles and to glue on the shroud adapter !!
I see glad it's not that type as I personally wouldn't of bought it
W
Welder
Wouldn’t be surprised if the person that mentioned it being Faffy was me. I did say I was one of the first to see it. Was quite interested at the time. You even wrote my details in your diary. Was really quite sad when I wasn’t contacted.🙁🙁
I did question the adhesive at the time mate.
W
Welder
Smarty pants 😀
We are all endowed with 20:20 vision, but at the time it was all we could come up with. To be fair tho, we still had huge amounts of interest - especially the big boys as it would still have saved them shed loads of time (money).
But did you chase him up
W
Welder
Hmm. There was some 'internal disagreement' about the keeping quiet thing. Lets just say, "That's no longer our strategy."
We expected to be launching quite quickly but it was nearly 18 months before we were able to properly do so. Getting those ducks in a row is like herding cats - that's the single most awful mixed metaphor ever!
W
Welder
Didn’t mean for it to sound like that mate(sorry). Always sceptical with stuff like that. That’s why I do not use his stuff.
What do you use now then?
Surely That’s why you wrote me in your diary?😀
W
Welder
Oh you don't read business cards then... 😉 EVERYONE we met that day had at least one 😳
W
Welder
I seem to tighten a lot of monoblocks up for folk. I get by with erm..erm...the universal ceramic cartidges from screwfix but may invest in one of your kits soon.
I dont just scrap a new tap just because its dripping.
W
Welder
For monoblocks i always used a 1/4 ratchet, long extension, uni joint and a deep socket set. Never once not been able to use it
Great vid “sweet lips”, some work gone into that mate
W
Welder
Thanks Town.
Yorkshire conceived, Yorkshire Engineered, (mostly) Yorkshire made 😉
Yorkshire conceived, Yorkshire Engineered, (mostly) Yorkshire made 😉
W
Welder
Tight is the phrase you're looking for 🙄
What that means old bean is you get nowt for owt. So, being the caring people we are we've made it profitable for you, profitable for custards & profitable for us. Who's losing out? Poor manufacturers 😛
What that means old bean is you get nowt for owt. So, being the caring people we are we've made it profitable for you, profitable for custards & profitable for us. Who's losing out? Poor manufacturers 😛
W
Welder
Meant tap manufacturers (actually only importers here in UK). Cartridges are bought from Spain but made in China, spindles all made in Sheffield 😎 The full story is on our site if you can be 4rsed 😀
W
Welder
I do apologise for seemingly hijacking your thread Phil. Just realised so I'll stop posting. Sorry. 😱
Surely yorkshire men get a extra yorkshire discount and them types from the midlands pay extra. Sounds good to me .
Dont stop posting! Im interested
I bet the tap medic kit cant fix this tap!
Good thing I asked for a picture first!
Look at the state of that tap whole and quality of the bath. Bath out job that is matey. Good luck.
W
Welder
W
Welder
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Nerrad tap wrench kit" which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
