Looking at the jib site for cscs cards, looks like all I would be able to get is the Plumbing related occupations, White card, which means probably next to naff all in wages.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter SafeGasInstall
- Start date
View the thread, titled "Nvq" which is posted in Plumbing Courses on UK Plumbers Forums.
Looking at the jib site for cscs cards, looks like all I would be able to get is the Plumbing related occupations, White card, which means probably next to naff all in wages.
Cscs is a health and safety mate ! Not going to earn you more if you had a gold one
NVQ level 2 cost is £1,000.00
just spoke to able skills .com
just spoke to able skills .com
Level 3 NVQ cost £1000
If it's your first nvq you could probably get funding lol
D
Dotty
L3 please sir....
You starting again
E
Ermintrude
The black one will net u a few pennies
http://cdn.cityandguilds.com/Produc...88-6189 experienced worker route_guidance.pdf
To all that are interested in obtaining an industry recognized City & Guilds 6189 NVQ Level 2 or 3 qualification. Please have a read through the document link above, it sets out what is required if you are an experienced worker who wishes to use this experience instead of completing the whole standard course with on-site assessments.
The main bit is as follows "This enables the candidate to achieve the practical element of the combination unit(s) by submitting evidence of work activities from his/her workplace. Any learning outcomes not covered by this process will still need to be achieved using other assessment methods required for the qualification."
"All the Performance and Knowledge Unit assessments will still need to be completed." Which means all the on-line exams & written projects will still need to be completed.
Level 2 has to be competed before you can go on to Level 3.
Take care ladies & gents what knowledge you may believe is needed to work as a plumber is not necessarily what City & Guild thinks (Well it isn't actually C&G but the Sector Skills Counsel for our industry = SummitSkills).
There is a charge every time you resit an exam for instants & they will still need to come & see you on site a number of times so make sure you have a good idea what the likely total costs will be.
I do not know of any colleges that run this route but there are a number of training providers, again take care & check them out properly.
Hope that helps.
(PS. thanks Neil S for the full info)
To all that are interested in obtaining an industry recognized City & Guilds 6189 NVQ Level 2 or 3 qualification. Please have a read through the document link above, it sets out what is required if you are an experienced worker who wishes to use this experience instead of completing the whole standard course with on-site assessments.
The main bit is as follows "This enables the candidate to achieve the practical element of the combination unit(s) by submitting evidence of work activities from his/her workplace. Any learning outcomes not covered by this process will still need to be achieved using other assessment methods required for the qualification."
"All the Performance and Knowledge Unit assessments will still need to be completed." Which means all the on-line exams & written projects will still need to be completed.
Level 2 has to be competed before you can go on to Level 3.
Take care ladies & gents what knowledge you may believe is needed to work as a plumber is not necessarily what City & Guild thinks (Well it isn't actually C&G but the Sector Skills Counsel for our industry = SummitSkills).
There is a charge every time you resit an exam for instants & they will still need to come & see you on site a number of times so make sure you have a good idea what the likely total costs will be.
I do not know of any colleges that run this route but there are a number of training providers, again take care & check them out properly.
Hope that helps.
(PS. thanks Neil S for the full info)
Last edited:
It ain't cheap
Things that are of value in this world rarely are !!
im actually quite flabbergasted at the amount of plumbers and engineers on this site that dont seem to have level 3 and in some cases level 2 NVQ!. How can you claim to be a plumber without level 2 certificate. I (like alot on here) came through a recognised apprenticeship and gained C&G craft cert. That made us a basic plumber, but we had to carry on through our C&G advanced craft cert to be a real plumber. After training many apprentices over the years, i think the NVQ system is carp and really need to do something about it. My current apprentice goes to college 1 day aweek starts at 9, tea break 10.30-11, lunch 12.30-1.30, tea break 3-3.30 then finish at 4.30!!!!!! thats 5.5 hrs. Back in the day we did 9-9 then 6-9 on a second night after work.
Quite agree missplumb , when i attended college it was month at a time over the 3 years , at least a month you have a chance but day release is a waste of time , its like watchin a really good series on tv thats on once a week , by the time next episodes on youve forgot what the last one was about, and there are loads of just nvq2 and alot of these short fast track courses and folks then call themselves plumbers, Last months edition of gassafe said IGEM are trying to phase out and stop these fast track courses and the sooner the better me thinks,
Careful you are showing your age (says he, who just got back from the Monty Python do).
We did spend a lot more time at college but seem to remember drawing a few stopcocks etc & doing a lot lot more practical, things which took longer to master like lead work & bronze welding etc both of which have now gone.
We did spend a lot more time at college but seem to remember drawing a few stopcocks etc & doing a lot lot more practical, things which took longer to master like lead work & bronze welding etc both of which have now gone.
E
Ermintrude
I got me level. 3 from a cornflakes packet
i remember having to strip down ballvalves, stop taps, sink taps atc down to their component parts, then getting a lecturer to come and see then we had to put them back together and show them working correctly before the would sign it off. and that went for everything we did,, making hanging brackets, cylinder cupbaords, bathrooms. and as for sheetwork, lead bashing, welding, Nuralite dog ears, zinc and copper sheetwork, brazing 4"copper pipes vertically, welding and cutting steel pipes. God we had it hard!!!!!!!!!
but im more of a TRAINED plumber than any NVQ plumber will ever be
but im more of a TRAINED plumber than any NVQ plumber will ever be
yeah, i seen the model startrek enterprise you made out of the cardboard
Qualifications as such as NVQ 2 /3 , ACS -gas , g3 , part L ,
dont mean nothing at all this days .
dont mean nothing at all this days .
Its a pitty as the schools are far more equipt now than ever b4, the tech college i attended at the time hadnt much money so when working on boilers or in your cubicle it was always old garbage but the last time i was in renewing my gas its had a huge overhall and all the best of equipment , i think alot of tech schools are getting the good of funding to help teach the kids in a better enviroment,
Not been able to train to a master degree all the youngsters(not just plumbing ) will mean that there will be very a weak mid class (work class ) !
Not having a good strong mid class (working class ) will turn into a deeper recession.
Not having a good strong mid class (working class ) will turn into a deeper recession.
my apprentice is with JTL and they recieve about £40,000 for every student they take on so the more the better for them. byt they dont get the final payment until the trainee has completed the whole course. my app has been training now for 6 years and still hasnt finished his write ups.
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Nvq" which is posted in Plumbing Courses on Plumbers Forums.
Similar plumbing topics
- BilboBaggins
- Plumbing Courses
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
