Pipework for bathroom - all ok?

[schmores]

Can someone take a look at the below and let me know if you see any issues with what I'm planning on doing?

The design is the rear wall of the bathroom. The whole thing will be sealed with aquapanel etc other than the two areas where the pump and shower control are, these will be concealed behind a mirror and vanity unit.

Im going to use speed fit for all the piping with cold bends for any parts of the pipe work that will be covered by paneling.

Im hoping its all ok but some feedback from people in the know would be greatly appreciated.

 

[kay-jay]

Is it a digital shower? If so I would site the digi box in the loft where access could be gained in the future.

 

[IDCHAPPY]

As above, looks ok but leave good access for the things that might need replaced or serviced in the future 🙂

 

[steadyon]

Two things I'd be a little concerned about:
a. How are you going to locate the shower pump. Unless the manufacturer's instructions say otherwise it shouldn't be screwed down.
b. Again check the manufacturer's instructions, but most don't like running in enclosed spaces without some / good ventilation.