Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Potential Air locks in TP210B cylinder pipework

View the thread, titled "Potential Air locks in TP210B cylinder pipework" which is posted in Air Sourced Heat Pumps Advice Forum on UK Plumbers Forums.

I have a Santon TP210B cylinder - I am told I have air in the system which is stopping the hot water from working. I have chopped into the existing heating circuit to add another radiator, but the hot water system seems to be suffering the most, which I cannot get my head around - This new radiator is not working (although all the existing ones are!), as well as the hot water - I have been told to find the air vent on the cylinder and try and let some air out. Is this black knob on top the air vent? I have already switched the silver 'Honeywell' switches to manual to open the valves.

Any other ideas on my issue?
 
Thanks for all your help. It was just a lot of air in the cylinder which my local plumber sorted but did say that where the heating pipes were, this problem was unavoidable and he did compliment me on my new radiator installation!
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Potential Air locks in TP210B cylinder pipework" which is posted in Air Sourced Heat Pumps Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread statistics

Created
Andrew Lear,
Last reply from
Andrew Lear,
Replies
3
Views
1,498
Back
Top